Abstract:A packaged filtering power divider (FPD) is presented, investigated and synthesized. The radiation loss and electromagnetic interference are reduced since the FPD is insulated in a completely enclosed substrate-integrated cavity. The isolation performance and transmission property of the proposed FPD are determined by the odd- and even-mode equivalent circuit, respectively. A 3rd-order quasi-elliptic filtering response is attained by the multi-mode filtering sections composed of doubly-stub-loaded parallel-coupled lines. Five extra TZs are generated by both the central-loading (CL) T-shaped stub and side-loading (SL) short-circuited 180° and open-circuited 90° branches, which further improves the selectivity of the passband and suppresses the higher-order harmonics. Two isolation resistors are elaborately placed between the two power-division paths, which significantly improves the isolation level over the whole passband and stopband. The design equations including the position of the TPs and TZs, and the values of the isolation resistors are derived in the synthesis procedure. For verification, an FPD prototype is designed, simulated, and measured. It exhibits advantages in terms of low loss, sharp band-edge skirts as well as wideband rejection and isolation, which is suitable for IoT (Internet of Things) applications and antenna-array feeding networks.

Balanced-to-unbalanced Filtering Power Divider with Compact Size and High Common-Mode Suppression

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

A Dual-Band Balanced-To-Balanced Power Divider With High Selectivity And Wide Stopband

A Compact Balanced-to-Balanced Filtering Gysel Power Divider Using $\lambda _{g}$ /2 Resonators and Short-Stub-Loaded Resonator

Filtering Power Divider with Good Output Balance and Unsymmetrical Structure

Dual-Band Filtering Power Divider Using Dual-Resonance Resonators with Ultrawide Stopband and Good Isolation

Packaged Filtering Power Divider with High Selectivity, Extended Stopband and Wideband Isolation

Broadband Balanced-to-Balanced Filtering Power Divider Using HMSIW-SSPP Transmission Line

High-performance filtering power divider with multiple transmission zeros

A Miniaturized Filtering Power Divider With High Selectivity and Wide Stopband Based on 3D Heterogeneous Integration Technology

Design of Filtering Power Divider with High Frequency Selectivity

Broadband Filtering Power Dividers Using Simple Three-Line Coupled Structures

Design of Compact Wideband Filtering Power Divider with Extended Isolation and Rejection Bandwidth

Synthesis of miniaturized wideband four‐way filtering power divider consisting of unequal‐width three‐coupled‐lines

Balanced Filtering Power Divider Based on Odd-mode Hybrid Microstrip and Slotline Spoof Surface Plasmon Polaritons

A New Wideband Filtering Power Divider Based on Rectangle Patch Resonator with Compact Size

Multilayer Balanced-to-Unbalanced Power Divider with Wideband Transmission Characteristic and Common-Mode Suppression

A Novel Filtering Power Divider with Improved Frequency Selectivity and Out-of-band Performance

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

A Compact Ultra-Wideband Power Divider with Favorable Selectivity Using Transversal Filtering Transformer

Compact Dual-Band Filtering-Response Power Divider with High In-Band Frequency Selectivity