Abstract:The presented paper describes the design, simulation, and analysis of a novel tunable comb-drive actuator that aims to increase the range of tuning resonance frequency while reducing the pull-in voltage. The conventional comb resonator has a limited resonant frequency tuning range, and hence, modifying the spring stiffness of the structure is crucial to obtain a tunable comb resonator. The proposed design includes eight flexible beams on each side that support a set of comb finger parts. The actuator achieves the goal of shifting the resonance frequency both downwards and upwards by utilizing Serpentine nested-folded beams. A triangular comb with non-uniform varied finger lengths combined with variable gap fingers is designed to adjust the frequency downwards, while a comb with constant finger lengths combined with variable gap fingers is designed to adjust the frequency upwards. To simulate and design the structure, the IntelliSuite software is utilized. The results show that the actuator has a primary resonant frequency of 3052 Hz, which can be lowered to 335 Hz by applying a tuning voltage of 74 V to the downward tuning part. Similarly, the resonant frequency can be increased to 3159 Hz by applying a tuning voltage of 60 V to the upward tuning part. The resonator achieves a maximum frequency tuning range of 90%, and the simulation results are in good agreement with the theoretical predictions. However, it is worth noting that the size of this resonator is relatively small, approximately 1077 × 328 μm2. This innovative design offers potential applications in various fields, including micro-electromechanical systems (MEMS), micro-optics, and microsensors. Overall, the presented work demonstrates the feasibility of achieving a tunable comb resonator with a significantly improved resonant frequency tuning range and reduced pull-in voltage.

A Mode-Selectable Beam Resonator Based on Sectionalized Electrodes

A MEMS Fishbone-Shaped Electrostatic Double-Ended Tuning Fork Resonator with Selectable Higher Modes

Locally Resonant Band Gaps in Flexural Vibrations of A Timoshenko Beam with Periodically Attached Multioscillators

Resonant Frequency Tunable Silicon Fishbone-Shaped MEMS Double Ended Tuning Fork.

Tailoring Mode Splitting and Degeneracy in Silicon Triply Resonant Nanobeam Cavities

High Sensitivity Micro Electrometer Based On Clamped Free Curved Beams Resonator With Weakened Nonlinearity

Ultra flexible pseudo-lamb wave RF resonators based on ZnO/PI and AlN/PI structures

Elastic Mode Semicircular Beams Resonator Oscillator with Weakened Nonlinearities

High performance SAW resonator with spurious mode suppression using double-layer electrode transverse modulation

Parametrically Excited Electrostatic MEMS Cantilever Beam With Flexible Support

An engineering feasible metastructure: Ring-spring-resonator based sandwich metabeam for vibration attenuation

Significant tuning of internal mode coupling in doubly clamped MEMS beam resonators by thermal effect

Tunability of resonator with pre-compressed springs on thermo-magneto-mechanical coupling band gaps of locally resonant phononic crystal nanobeam with surface effects

Mechanical Nonlinearity Elimination with a Micromechanical Clamped-Free Semicircular Beams Resonator

Design of a Silicon Beam Resonator for a Novel Gas Sensor

Nonlinear Dynamic Analysis of an Electrostatically Actuated Clamped-Clamped Beam and Excited at the Primary and Secondary Resonances

Methods for Nonlinearities Reduction in Micromechanical Beams Resonators

Design of tunable GHz-frequency optomechanical crystal resonators

Design and simulation of a tunable comb-drive actuator with a wide frequency tuning range and low pull-in voltage

High- Integrated CMOS-MEMS Resonators With Deep-Submicrometer Gaps and Quasi-Linear Frequency Tuning

A high frequency SiC nanobeam resonator with ultra-sensitivity