Abstract:The micro-electro-mechanical system (MEMS) resonator developed based on surface processing technology usually changes the section shape either due to excessive etching or insufficient etching. In this paper, a section parameter is proposed to describe the microbeam changes in the upper and lower sections. The effect of section change on the mechanical properties is studied analytically and verified through numerical and finite element solutions. A doubly-clamped microbeam-based resonator, which is actuated by an electrode on one side, is investigated. The higher-order model is derived without neglecting the effects of neutral plane stretching and electrostatic nonlinearity. Further, the Galerkin method and Newton⁻Cotes method are used to reduce the complexity and order of the derived model. First of all, the influence of microbeam shape and gap variation on the static pull-in are studied. Then, the dynamic analysis of the system is investigated. The method of multiple scales (MMS) is applied to determine the response of the system for small amplitude vibrations. The relationship between the microbeam shape and the frequency response is discussed. Results show that the change of section and gap distance can make the vibration soften, harden, and so on. Furthermore, when the amplitude of vibration is large, the frequency response softening effect is weakened by the MMS. If the nonlinearity shows hardening-type behavior at the beginning, with the increase of the amplitude, the frequency response will shift from hardening to softening behavior. The large amplitude in-well motions are studied to investigate the transitions between hardening and softening behaviors. Finally, the finite element analysis using COMSOL software (COMSOL Inc., Stockholm, Sweden) is carried out to verify the theoretical results, and the two results are very close to each other in the stable region.

Parametrically Excited Electrostatic MEMS Cantilever Beam With Flexible Support

Linear Parametric Amplification/attenuation for MEMS Vibratory Gyroscopes Based on Triangular Area-Varying Capacitors

A Novel Triangular-Electrode Based Capacitive Sensing Method for MEMS Resonant Devices

Amplitude Deflection in a Nonlinear MEMS Resonator under Parametric Excitation

On Weakly Coupled Resonant MEMS Transducers Operating in the Modal Overlap Regime

Nonlinear Dynamic Analysis of Electrostatically Actuated Resonant MEMS Sensors under Parametric Excitation

Static and Dynamic Mechanical Behaviors of Electrostatic MEMS Resonator with Surface Processing Error

Parametric Amplification of Acoustically Actuated Micro Beams Using Fringing Electrostatic Fields

Dynamics of nonlinear coupled electrostatic micromechanical resonators under two-frequency parametric and external excitations

Nonlinear dynamical system of micro-cantilever under combined parametric and forcing excitations in MEMS

Nonlinear Vibration of Electrostatically Actuated MEMS Resonators under Parametric and External Excitations

Dynamics and Stability of Multi-segment Micro-beam Primary Resonance and Parametric Resonance with Considering the Size Effect

Monostable Dynamic Analysis of Microbeam-Based Resonators Via an Improved One Degree of Freedom Model.

Sensitivity Enhancement of Nonlinear Micromechanical Sensors Using Parametric Symmetry Breaking

Hyperelastic Microcantilever AFM: Efficient Detection Mechanism Based on Principal Parametric Resonance

Mechanical Behaviors of Electrostatic Microbeams with Nonideal Supports

Parametric drive MEMS resonator with closed-loop vibration control at ambient pressure

A New Scheme to Enhance/Decrease Sensitivity of a Mems Resonator Using Parametric Modulation

Design, Fabrication, and Dynamic Analysis of a MEMS Ring Resonator Supported by Twin Circular Curve Beams

High Sensitivity Micro Electrometer Based On Clamped Free Curved Beams Resonator With Weakened Nonlinearity

Design and Simulation of MEMS Silicon Micro-Cantilever Resonant Sensor