Abstract:A technological route for recycling silicon slurry cutting waste (SSCW) as silicon source to prepare high purity silicon carbide as well as reducing the industry cost and avoiding the environmental pollution aroused by the waste was explored. The effect of Fe2O3, NaCl addition and smelting temperature on production of high quality SiC were studied. The existence of Fe element acts like a catalyst and contributes to the synthesis of SiC at relatively low temperatures (1550 °C). The excess of Fe element in the SSCW, however, would inhibit further improvement of the purity of the SiC product since Fe element would remain in the final product as Si-Fe alloy. Slight addition of salt was also verified to be positive for the improvement of SiC yield and purity. SiC product with a purity of more than 93 wt.% was obtained after acid leaching for the removal of Fe impurity and under the optimized conditions as NaCl addition of 7 wt.% and smelting temperature of 1850 °C. The thermodynamic analysis shows that a series of intermediate gas products (CO, SiO, SiO2) have been generated and taken an important role in the synthesis of SiC and excess carbon source is necessary for promoting the utilization of the SSCW since it can efficiently contribute to the formation of SiC and the intermediate products namely SiO and CO. The nucleation mechanism analysis indicates that both the original size and morphology of the carbon source and SiC particles have great influence on the forming particle size and morphology of the generated SiC since both can act as a nucleation center for a certain amount of SiC which is verified by the SEM analysis.

Novel Two-Step Process for Synthesising Β-Sic Whiskers from Coal Fly Ash and Water Glass

Synthesis of Bamboo‐like SiC Whiskers from Waste Silica Fume

High Yield Silicon Carbide Whiskers from Rice Husk Ash and Graphene: Growth Method and Thermodynamics

Effect of Catalyst on the Preparation of Silicon Carbide Whiskers from Silica and Carbon

A New Route to Synthesize SiC−AlN Solid Solution Whiskers

Theoretical design and preparation of SiC whiskers catalyzed by Fe-oxides on carbon fibers

Growth of silicon carbide whiskers in FexSiy flux

Dilithium Dialuminium Trisilicate Crystalline Phase Prepared from Coal Fly Ash

Combustion Synthesis of Β-Sialon Whiskers

Recycle of silicon slurry cutting waste to prepare high purity SiC by salt-assisted carbothermic reduction

Synthesis and characterization of silicon carbide whisker arrays prepared by thermal evaporation method

Improving the strength and oxidation resistance of phenolic resin derived pyrolytic carbons via Cu-catalyzed in-situ formation of SiC@SiO2

Synthesis mechanism of α-Si3N4 whiskers via SiO vapor in reaction bonded Si3N4-SiC composite

From two-dimensional to one-dimensional structures: SiC nano-whiskers derived from graphene via a catalyst-free carbothermal reaction

Analysis of Influencing Factors in the Preparation of Mullite Whiskers from Recovering Silicon-Rich Waste under Low-Temperature Conditions

α-Si3N4 and Si2N2O whiskers from rice husk and industrial rice husk ash

Direct observation of the growth process of silicon carbide nanowhiskers by vapor–solid process

Improved thermal shock stability and oxidation resistance of low-carbon MgO–C refractories with introduction of SiC whiskers

Porous silica synthesis out of coal fly ash with no residue generation and complete silicon separation

Formation and Application of Hierarchical Calcium Silicate-Calcium Sulfate Whiskers

Synthesis of 2H-Sic Whiskers by Decomposition of Si<sub>3</sub>N<sub>4</sub>