Abstract:The most promising source of alumina in the 21st century is the coal fly ash (CFA) waste of coal-fired thermal plants. The methods of alumina extraction from CFA are often based on the pressure alkaline or acid leaching or preliminary roasting with different additives followed by water leaching. The efficiency of the alumina extraction from CFA under atmospheric pressure leaching is low due to the high content of acid-insoluble alumina phase mullite (3Al2O3·2SiO2). This research for the first time shows the possibility of mullite leaching under atmospheric pressure after preliminary desilication using high liquid to solid ratios (L:S ratio) and Na2O concentration. The analysis of the desilicated CFA (DCFA) chemical and phase composition before and after leaching has been carried out by inductively coupled plasma optical emission spectrometry (ICP-OES) and X-ray diffraction (XRD). The morphology and elemental composition of solid product particles has been carried out by scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX). An automated neural network and a shrinking core model (SCM) were used to evaluate experimental data. The Al extraction efficiency from DCFA has been more than 84% at T = 120 °C, leaching time 60 min, the L/S ratio > 20, and concentration of Na2O-400 g L-1. The kinetics analysis by SCM has shown that the surface chemical reaction controls the leaching process rate at T < 110 °C, and, at T > 110 °C after 15 min of leaching, the process is limited by diffusion through the product layer, which can be represented by titanium compounds. According to the SEM-EDX analysis of the solid residue, the magnetite spheres and mullite acicular particles were the main phases that remained after NaOH leaching. The spheric agglomerates of mullite particles with non-porous surface have also been found.

Dilithium Dialuminium Trisilicate Crystalline Phase Prepared from Coal Fly Ash

Preparation of Fly Ash-Based Porous Ceramic with Alumina as the Pore-Forming Agent

Synthesis and Characterization of Lithium Zeolites with Abw Type from Coal Fly Ash

Carbothermal Reduction Nitridation of Fly Ash, Diatomite and Raw Illite: Formation of Nitride Powders with Different Morphology and Photoluminescence Properties

Synthesis, Characterization and Sintering Behaviour of Indialite Ceramic from Fly Ash.

Effects of Sodium Carbonate and Sodium Chloride Additives on Alkaline Fusion of Coal Fly Ash

Study on Preparation and Characterization of gamma-Al(2)O(3) from Coal Fly Ash

Synthesis of zeolite Li-ABW from fly ash by fusion method

Extraction of Aluminum Hydroxide from Coal Fly Ash by Pre-Desilication and Calcination Methods

Hydrothermal Synthesis of Sodalite from Coal Fly Ash and Its Property Characterization

Coprecipitation synthesis of Si-modified mesoporous alumina with high thermal stability from coal fly ash

Structure, morphology and mechanism research on synthesizing xonotlite fiber from acid-extracting residues of coal fly ash and carbide slag

The preparation of silica white from fly ash and its characterization

Study on preparation and surface modification of precipitated silica obtained from fly ash

Activation Pretreatment and Leaching Process of High-Alumina Coal Fly Ash to Extract Lithium and Aluminum

Role of silicon in the growth of ZSM-5 synthesized with coal fly ash as raw materials

Kinetics Study of Al Extraction from Desilicated Coal Fly Ash by NaOH at Atmospheric Pressure

Extraction and Value-Added Utilization of Alumina from Coal Fly Ash Via One-Step Hydrothermal Process Followed by Carbonation

Recovery of Alumina from Coal Fly Ash by CaCl2 Calcination Followed byH2SO4 Leaching

Preparation of pseudo-boehmite via carbonation of sodium aluminate lixivium extracted from coal fly ash