Abstract:In this work, the effect of SiC addition on the microstructure, porosity, phase composition, weight gain, and thickness of TGO of the coatings after repeated oxidation at 1300 °C for various time of APS SiC-YSZ TBCs have been investigated. The phase of the as-sprayed coatings is consisted of t'-ZrO 2 , SiC and very little SiO 2 . With the increase of SiC addition, the diffraction peak intensity of SiC and SiO 2 are both increased. SiC and SiO 2 can fill into the pores in YSZ effectively. However, the porosity in the coatings has little changed with the increased of SiC addition. The addition of SiC during repeated oxidation at 1300 °C can limit the development of the m-ZrO 2 phase while causing no ZrO 2 lattice deformation. Increasing the SiC addition can impede the growth of TGO between the bonding layer and the ceramic layer, lowering the thermal weight gain rate of the SiC-YSZ coating. The lowest thermal weight gain rate occurs when the SiC composite concentration is 15 wt%. When the composite content of SiC is increased by 10 wt%, the percentage of O element at the interface between the bonding layer and the ceramic layer decreases by approximately 6.56 wt%. Increasing the SiC concentration will improve the compactness of the interface between the bonding and ceramic layers, and limit grain formation in the bonding layer. However, the SiC composite composition must match the ceramic coating's porosity. When the SiC percentage is too low, the ceramic layer's porosity increases and TGO development accelerates. When the SiC concentration is too high, it agglomerates and connects within the coating, causing the coating to fail off during high temperature service.

Thermal Cycling Resistance of ZrB2‒SiC Coatings with MgO Additive on SiC Coated Graphite

Effect of silicon/graphite ratio and temperature on oxidation protective properties of SiC/ZrB2–SiC coatings prepared by pack cementation

Research on Microstructure and Oxidation Resistant Property of ZrSi2-SiC/SiC Coating on HTR Graphite Spheres

ZrSi2-SiC/SiC Anti-Oxidant Coatings Prepared on Graphite Spheres by Two-Step Pack Cementation Process

Formation and Oxidation Behavior of Mo-Si-B Composite Coatings with B-rich Interlayer Prepared by Slurry Sintering Method

Microstructure, surface stress and surface temperature response of ZrB2–SiC based coatings

Effect of the Y2O3 amount on the oxidation behavior of ZrB2-SiC-based coatings for carbon/carbon composites

Effect of boronizing treatment on the oxidation resistance of Zr2(AlSi)4C5/SiC composite

Thermal cycling behavior of La2Zr2O7/Yb2Si2O7/SiC coated PIP Cf/SiC composites under burner rig tests

ZrB2 particles reinforced glass coating for oxidation protection of carbon/carbon composites

A dense ZrB2-SiC-Si/SiC-Si coating to protect carbon/carbon composites against oxidation at 1773 K and 1973 K

A gradient composite coating to protect SiC-coated C/C composites against oxidation at mid and high temperature for long-life service

Effect of Si, Al2O3 additives on the ablation behavior of ZrB2-SiC coating with Al2O3-modified SiC bond coat for C/C composites

Ablation behavior of ZrB2–SiC–Si composites with WC and MoSi2 additives coated through SPS on graphite

Comparative study of B4C, Mg2B2O5, and ZrB2 powder additions on the mechanical properties, oxidation, and slag corrosion resistance of MgO–C refractories

Dual layer SiC coating on matrix graphite sphere prepared by pack cementation and fluidized-bed chemical vapor deposition

Effect of the ZrB2 content on the oxygen blocking ability of ZrB2-SiC coating at 1973K

Microstructural evolution and high-temperature oxidation behavior of plasma sprayed SiC-YSZ TBCs

High temperature oxidation resistance of Y2O3 modified ZrB2-SiC coating for carbon/carbon composites

High emissivity MoSi2–ZrO2–borosilicate glass multiphase coating with SiB6 addition for fibrous ZrO2 ceramic

The effect of the SiC content on the high duration erosion behavior of SiC/ZrB2– SiC/ZrB2 functionally gradient coating produced by shielding shrouded plasma spray method