Abstract:As a novel type of additive manufacturing, three-dimensional (3D) printing can efficiently realize the manufacturing of ceramic devices with more sophisticated structures. In this study, the method combining digital light processing (DLP) 3D printing technology and modified ceramic precursor polysiloxane (PSO) was not only used to fabricate Al2O3 ceramic devices with a gradient impedance bilayer structure, which consist of a cross-twist/flat structure with a torsion angle of 60°, but also to prepare needle-like SiC nanowire absorbents grown in situ to further endow the ceramic functional characteristics. The microstructure was regulated by different times of impregnation, light-curing, and thermal treatment of ferrocene-modified PSO, and Al2O3/SiCnw/SiOC composites with different electromagnetic absorption properties were prepared. We found that the Al2O3/SiCnw/SiOC composite (sample 1400–2) exhibited the optimal microwave absorption performance when it was immersed and light-cured twice, which was ascribed to its comprehensive satisfaction of the impedance matching and attenuation characteristics. When the thickness of sample 1400–2 was as thin as 2.5 mm, the minimum reflection coefficient (RCmin) reached −44.35 dB, indicating that more than 99.9990% of the electromagnetic waves could be absorbed. As the thickness increased to 2.8 mm, the effective absorption bandwidth (EAB) in the X-band was 3.6 GHz, which indicated that the effective coverage rate was as high as 85.7%. The results indicate that the generation of the stacking fault, dipole and interfacial polarization of the Al2O3/SiCnw/SiOC composites, and increasing conductivity contribute to the promotion of dielectric loss. Thus, the Al2O3/SiCnw/SiOC composite with bilayer gradient impedance structures is a good candidate for stealth radar wave absorption.

Electromagnetic Properties of Porous Si3N4 Ceramics with Gradient Distributions of SiC and Pores Fabricated by Directional In–situ Nitridation Reaction

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Preparation, mechanical, dielectric and microwave absorption properties of hierarchical porous SiCnw-Si3N4 composite ceramics

Porous SiC-Si2N2O-Si3N4 composite ceramics with excellent EMW absorption properties prepared by gelcasting and carbonthermal reduction

Cross-scale construction of SiCāSi 3 N 4 porous ceramics with superior electromagnetic wave absorption performance

Enhanced electromagnetic wave absorption properties of a novel SiC nanowires reinforced SiO2/3Al2O3·2SiO2 porous ceramic

Microstructures, Mechanical Properties and Electromagnetic Wave Absorption Performance of Porous SiC Ceramics by Direct Foaming Combined with Direct-Ink-Writing-Based 3D Printing

Electromagnetic wave-transparent porous silicon nitride ceramic prepared by gel-casting combined with in-situ nitridation reaction

In Situ Growth of One-Dimensional Nanowires on Porous PDC-SiC/Si3N4 Ceramics with Excellent Microwave Absorption Properties

Selective microwave absorption of SiC–Si 3 N 4 porous ceramics prepared by sacrificial template method

Porous Si3N4-based Ceramics with Uniform Pore Structure Originated from Single-Shell Hollow Microspheres

3D-printed impedance gradient Al2O3 ceramic with in-situ growing needle-like SiC nanowires for electromagnetic wave absorption

In-situ Reaction Synthesis of Porous Si2N2O-Si3N4 Multiphase Ceramics with Low Dielectric Constant Via Silica Poly-Hollow Microspheres

Increased microwave absorption property of porous Si3N4 ceramics by loading polymer-derived SiCN for a multifunctional design

Mechanical and dielectric properties of porous and wave-transparent Si3N4-Si3N4 composite ceramics fabricated by 3D printing combined with chemical vapor infiltration

A comparative study on dielectric and mechanical properties of porous β-Si3N4 ceramics by controlling porosity and microstructure

Microwave absorption performance of porous heterogeneous SiC/SiO2 microspheres

Bidirectional periodic pore structure Si-C-N multiphase ceramic with high thermostability and excellent microwave absorption properties over a wide temperature range

Porous SiC–Si3N4 composite ceramics with excellent EMW absorption property prepared by gelcasting using DMAA

Properties of porous Si3N4 ceramic electromagnetic wave transparent materials prepared by technique combining freeze drying and oxidation sintering

Enhanced mechanical and wave‐absorption properties of SiC–Si3N4–FeSi porous ceramics by introducing Al