Abstract:The nucleation, growth, and degeneration behaviors of MC carbides in the Ni-12Mo-7Cr-2Ti-0.06C alloy during the long-term thermal exposure at 650 °C – 850 °C have been investigated. Two kinds of MC carbides, namely the stacking-fault-precipitate (SFP) type ones and the flake-like ones, have been observed in the exposed specimens. The SFP-type MC carbides possess a semi-coherent interface of (111) MC // (111) γ with the matrix by the cube-on-cube orientation relationship (OR), which show the excellent thermal stability at 650 °C and the rapid coarsening and degeneration at the higher temperature. The flake-like MC carbides possess a semi-coherent interface of (11 1 ̄ ) MC // (002) γ with the matrix by the rotated OR, which play a dominant role at the initial stage of exposure at 850 °C. All MC carbides contain Mo, Ti and a small number of Cr and Ni. According to the first principle calculation results, the doping of Mo can facilitate the nucleation of MC carbides by decreasing the chemical interface energy. Based on crystallographic analyses, the evolution mechanisms of MC carbides were discussed. At the initial stage, the dislocations form around the primary MC carbides and the growing secondary ones. The Ti segregation can lower the stacking fault energy at dislocations and promote the dissociation of dislocation to form the clean stacking faults (SFs). Then, the expansion of SFs and the formation of MC carbides go on simultaneously as described by the Silcock-Tunstall model. The dense distribution of MC carbides on SFs aggravates the rapid coarsening and degeneration. The flake-like MC carbides tend to deviate from the strict rotated OR to eliminate the lattice mismatching during the coarsening process. In this premise, the predicted well-matched interface should be along (11 1 ̄ ) γ and (111) γ planes and possess the stepped morphology with a deviation angle of ~9° from the (11 1 ̄ ) γ planes, which well agrees with the experiment observations.

Evolution of Grain Boundary Carbides in Thermal Exposed Ti-modified Alloy N

B22-P-17Evolution of the MC Carbide in Nickel-base Single Crystal Superalloy Exposing at 950 °C

Evolution of MC carbides in Ni-Mo-Cr-Ti based alloy for applications in molten salt reactors

Microstructure and Sliding Wear Behavior of PM Alloy Al10Ti after Thermal Exposure

Crystallography and morphology evolution of MC carbides in Ni-12Mo-7Cr-2 Nb based superalloy

MC decomposition and boride formation in a next generation polycrystalline Ni based superalloy during isothermal exposure at 900 °C

Thermal stability of carbides in a Ni-based single crystal superalloys

Effect of Thermal Exposure on Microstructure Evolution and Mechanical Properties of TC25G Alloy

Carbide Evolution of a Directionally Solidified Ni-Based Superalloy During Long-Term Exposure

Influence of thermal exposure on microstructural stability and tensile properties of a new Ni-base superalloy

Changes of Carbides Morphology in the Alloy Ti 15Al 7C during Heat Treatment

Microstructure Evolution and Phase Transformation in a Nickel-Based Superalloy with Varying Ti/Al Ratios: Part 2 – Phase Transformation

Effect of μ precipitation and γ′ evolution on intra/intergranular strength of Ni-Co-Cr-based superalloys after 800 °C thermal exposure

Influence of Ti Elements on the Evolution of Microstructure, Mechanical Properties and Thermal Stability of Al-Cu Alloy

Insights into Microstructural Stability and Embrittlement of TC25 High Temperature Titanium Alloy Subjected to Thermal Exposure

Precipitation, Transformation, and Coarsening of Carbides in a High-Carbon Ni-based Superalloy During Selective Laser Melting and Hot Isostatic Pressing Processes

Microstructure evolution and its impact on mechanical properties of a cobalt-based superalloy subjected to long-term heat-treatments

Microstructural Evolution and Tensile Property of 1cr15ni36w3ti Superalloy During Thermal Exposure

Precipitation and Evolution of Grain Boundary Boride in A Nickel-Based Superalloy During Thermal Exposure

Control of precipitation behaviour of Hastelloy-X through grain boundary engineering

Grain Boundary Carbides Evolution and Their Effects on Mechanical Properties of Ni 690 Strip Weld Metal at Elevated Temperature