Abstract:The nucleation, growth, and degeneration behaviors of MC carbides in the Ni-12Mo-7Cr-2Ti-0.06C alloy during the long-term thermal exposure at 650 °C – 850 °C have been investigated. Two kinds of MC carbides, namely the stacking-fault-precipitate (SFP) type ones and the flake-like ones, have been observed in the exposed specimens. The SFP-type MC carbides possess a semi-coherent interface of (111) MC // (111) γ with the matrix by the cube-on-cube orientation relationship (OR), which show the excellent thermal stability at 650 °C and the rapid coarsening and degeneration at the higher temperature. The flake-like MC carbides possess a semi-coherent interface of (11 1 ̄ ) MC // (002) γ with the matrix by the rotated OR, which play a dominant role at the initial stage of exposure at 850 °C. All MC carbides contain Mo, Ti and a small number of Cr and Ni. According to the first principle calculation results, the doping of Mo can facilitate the nucleation of MC carbides by decreasing the chemical interface energy. Based on crystallographic analyses, the evolution mechanisms of MC carbides were discussed. At the initial stage, the dislocations form around the primary MC carbides and the growing secondary ones. The Ti segregation can lower the stacking fault energy at dislocations and promote the dissociation of dislocation to form the clean stacking faults (SFs). Then, the expansion of SFs and the formation of MC carbides go on simultaneously as described by the Silcock-Tunstall model. The dense distribution of MC carbides on SFs aggravates the rapid coarsening and degeneration. The flake-like MC carbides tend to deviate from the strict rotated OR to eliminate the lattice mismatching during the coarsening process. In this premise, the predicted well-matched interface should be along (11 1 ̄ ) γ and (111) γ planes and possess the stepped morphology with a deviation angle of ~9° from the (11 1 ̄ ) γ planes, which well agrees with the experiment observations.

Evolution of MC carbides in Ni-Mo-Cr-Ti based alloy for applications in molten salt reactors

B22-P-17Evolution of the MC Carbide in Nickel-base Single Crystal Superalloy Exposing at 950 °C

Crystallography and morphology evolution of MC carbides in Ni-12Mo-7Cr-2 Nb based superalloy

Heterogeneous 3D Morphological Evolution of Ni Microparticles in Molten Salts: Visualized by Operando Synchrotron X-ray Nano-tomography

Formation and Evolution Behavior of M6C Carbide in a Ni-W-Cr Superalloy

Formation and evolution behavior of M 6 C carbide in a Ni-W-Cr superalloy

Effect of W/Mo ratio on the microstructure of Ni-Mo-W-Cr-Nb based superalloys after thermal exposure

Formation of nano-sized M2C carbides in Si-free GH3535 alloy

Dislocation Climbing Dominated Decomposition and Fracture of Carbides in a Ni-based Superalloy

Evolution of Grain Boundary Carbides in Thermal Exposed Ti-modified Alloy N

Creep Behavior and Deformation Mechanism of a Third-Generation Single Crystal Ni-Based Superalloy at 980 °C

Thermal stability of carbides in a Ni-based single crystal superalloys

Microstructure Evolution and Phase Transformation in a Nickel-Based Superalloy with Varying Ti/Al Ratios: Part 2 – Phase Transformation

MC decomposition and boride formation in a next generation polycrystalline Ni based superalloy during isothermal exposure at 900 °C

Transformation behavior of primary MC and M 2 C carbides in Cr4Mo4V steel

Compositional and structural characterization of alloyed carbide by 3D atom probe and high-resolution TEM

Intermediate Temperature Embrittlement of One New Ni-26w-6cr Based Superalloy for Molten Salt Reactors

Effect of Mo on microstructural stability of a 4th generation Ni-based single crystal superalloy

Hot Deformation Behavior and Workability of a New Ni–W–Cr Superalloy for Molten Salt Reactors

Evolution Behavior of Carbides in 2.25Cr-1Mo-0.25v Steel

Molten Salt Compatibility of a Ni–Cr-Mo-Ti Alloy Developed Indigenously for the Indian MSBR