Abstract:The microstructure evolution of the K403 Ni-based superalloy as a function of thermal exposure temperature and time was investigated using correlative characterization, including a combination of scanning electron microscopy, electron backscatter diffraction, transmission electron microscopy, high angle angular dark-field scanning transmission electron microscopy imaging and electron energy loss spectroscopy. The as-cast microstructure of the K403 alloy shows a typical dendritic structure and consists of a gamma solid solution, gamma' phase, (gamma + gamma') eutectic phase and a metal carbide (MC) phase. The solutes of Ni and Ti are enriched in the gamma solid solution, while, the solutes of Cr and Co are enriched in the gamma' phase. The morphology of the y' phase is nearly cubic. After thermal exposure at 800 degrees C or 950 degrees C for up to 200 h, the typical dendritic structure and a similar solute segregation behavior were still observed. However, the MC carbides were partially decomposed and further transformed to the M6C phase and M23C6 phase. Furthermore, the size of y' was increased from 302.88 +/- 20.49 nm to 374.75 +/- 29.76 nm (800 degrees C, 50 h) and 751.73 +/- 123.14 nm (950 degrees C, 50 h), respectively. The morphology of y' was changed from cubic to triangular or round. Clearly, there is a significant coarsening of y' during thermal exposure. A topologically close-packed (TCP) a phase was observed after thermal exposure at 800 degrees C for 100 h or 950 C for 50 h. More interestingly, an in-situ phase transformation of the a phase to other TCP phase (i.e. P phase) was also observed after thermal exposure at 950 degrees C for 50 h. The formation and transformation of carbide (i.e. M6C phase, M23C6 phase) and TCP phases (i.e. a phase, P phase) is proposed to be a diffusion-controlled process and can be attributed to the solute diffusion during thermal exposure. The present investigation provides a better understanding on the high temperature performance of the K403 Ni-based superalloy, which is essential to predict the failure and thereby enhance the reliability and service life of the K403 Ni-based superalloy. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Thermal stability of carbides in a Ni-based single crystal superalloys

B22-P-17Evolution of the MC Carbide in Nickel-base Single Crystal Superalloy Exposing at 950 °C

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Microstructure Evolution and Mechanical Performance of Nickel Based Superalloy C1023 at Elevated Temperatures

Influence of thermal exposure on microstructural stability and tensile properties of a new Ni-base superalloy

Effects of Long Term Thermal Exposure on Microstructure and Mechanical Property Evolution of a New Wrought Ni–Fe Based Superalloy

Effect of Long-Term Aging on Microstructural Stability and Tensile Deformation of a Fe–Ni-based Superalloy

Carbide Evolution of a Directionally Solidified Ni-Based Superalloy During Long-Term Exposure

Microstructural Stability of Long-Term Aged Wrought Ni–Fe-based Superalloys

Microstructure evolution and its impact on mechanical properties of a cobalt-based superalloy subjected to long-term heat-treatments

Comparative study of temperature-dependent oxidation and interdiffusion behavior on NiCoCrAlYHf-coated nickel-based single-crystal superalloys

Investigation of Microstructural Stability and Tensile Deformation Behavior of a Novel PM Ni-based Superalloy During Long-Term Thermal Exposure

Investigation on chemical stability of alloy carbides at high temperature

The microstructure evolution and its effect on the mechanical properties of a hot-corrosion resistant Ni-based superalloy during long-term thermal exposure

Study of Aging Temperature on the Thermal Compression Behaviors and Microstructure of a Novel Ni-Cr-Co-Based Superalloy

MC decomposition and boride formation in a next generation polycrystalline Ni based superalloy during isothermal exposure at 900 °C

Stability of Microstructure and Mechanical Properties of A Ni-Based Superalloy for Advanced Ultra-Supercritical Fossil Power

Dislocation Climbing Dominated Decomposition and Fracture of Carbides in a Ni-based Superalloy

Effect of μ precipitation and γ′ evolution on intra/intergranular strength of Ni-Co-Cr-based superalloys after 800 °C thermal exposure

Investigation on γ′ stability in CoNi-based superalloys during long-term aging at 900 °C

Correlative Characterization on Microstructure Evolution of Ni-Based K403 Alloy During Thermal Exposure