Abstract:The Ni-Fe-based superalloy GH4169 (Inconel718) is widely used for several critical gas-turbine components which are hot forged. Its microstructure and property are sensitive to the parameter adjustment during hot working process. To obtain required low-cycle fatigue and fracture properties, it is essential that the microstructure is controlled during preheating and heat treatment. The evolution of non-uniform microstructure during hot working is more complicated than that of uniform microstructure. On the other hand, various secondary phases can be observed in GH4169 alloy, thus it is important to investigate the effect of secondary phases on the microstructure evolution during forging process. In this work, the mechanisms of non-uniform microstructure evolution in GH4169 alloy were studied by analyzing the evolution of secondary phases, grain boundary misorientation, grain size and interactions of dislocation. It is found that the volume fraction of 8 phase increases with the increasing of temperature and heating time at the lower temperature. While at the higher temperature, it decreases monotonously with the temperature increasing, but increases first and then decreases to stable value with time increasing. The pinning effect of secondary phases in GH4169 alloy can be concluded that the gamma '' phase and 8 phase precipitated within the grains retain movement of dislocation, the 8 phase precipitated at the grain boundary hinders the nucleation and growth of recrystallized grains, and the carbides limits the grain growth. The frequency of low angle grain boundary decreases with temperature and time increasing, and the mobility of low angle grain boundary increases with temperature increasing. The uniformity of microstructure and the size of equaxied subgrain increases with heating temperature and time increasing. Continuous recrystallization of elongated grain occurs at specific conditions. The mechanisms of non-uniform microstructure evolution during heating process can be concluded as sub grain growth, recrystallized grain growth, and anneal twinning nucleation and growth. The recrystallized grains are formed by the growth of subgrains conducted by the rotation of low angle grain boundary and the movement of dislocation. When the grain growth is pinned, the mechanisms for the energy dissipation is the nucleation and growth of anneal twinning. And the growth of anneal twinning promotes the generation of low angle grain boundaries at the tip of partial anneal twinning.

Grain Boundary Carbides Evolution and Their Effects on Mechanical Properties of Ni 690 Strip Weld Metal at Elevated Temperature

Grain Boundary Feature and Its Effect on Mechanical Property of Ni 690 Alloy Layer Produced by GTAW

Precipitation Behavior of Grain Boundary M23C6 and Its Effect on Tensile Properties of Ni–Cr–W Based Superalloy

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Mechanisms of Non-Uniform Microstructure Evolution in Gh4169 Alloy During Heating Process

Intermediate Temperature Brittleness and Directional Coarsening Behavior of Nickel-Based Single-Crystal Superalloy DD6

Grain Boundary Character Correlated Carbide Precipitation and Mechanical Properties of Ni-20Cr-18W-1Mo Superalloy

The Evolution of Microstructure and Mechanical Properties at Elevated Temperature of Cast Al–Li–Cu–Mg Alloys with Ni Addition

Microstructure Evolution and Mechanical Performance of Nickel Based Superalloy C1023 at Elevated Temperatures

Improve the ductility of a nickel based superalloy by optimizing secondary phase distribution through grain boundary engineering

Effect of Temperature on Tensile Behavior of Ni–Cr–W Based Superalloy

Study on the high temperature tensile properties and strengthening mechanism of nitrogen containing nickel‐based deposited metals

Effects of Microstructure Evolution on the Deformation Mechanisms and Tensile Properties of a New Ni-base Superalloy During Aging at 800 °C

High‐Temperature Deformation Behavior and Microstructural Evolution of N06625 Nickel‐Based Alloy

High Temperature Deformation Behavior and Microstructure Evolution of Wrought Nickel-Based Superalloy GH4037 in Solid and Semi-Solid States

Effect of Microstructure on High Temperature Mechanical Properties in Forming Ni-20cr-10mo-10co Superalloy

Effect of μ precipitation and γ′ evolution on intra/intergranular strength of Ni-Co-Cr-based superalloys after 800 °C thermal exposure

New insights into ductility improvement of a nickel-based superalloy through grain boundary engineering

Effect of Μ Precipitation and Γ′ Evolution on Intra/intergranular Strength of Ni-Co-Cr-based Superalloys after 800 ℃ Thermal Exposure

Temperature-dependent Deformation Mechanisms and Microstructural Degradation of a Polycrystalline Nickel-Based Superalloy

Effect of Grain Boundary Behaviour on Ductility Dip Cracking Mechanism