Abstract:Grain boundaries serration has long been regarded as a way to improve mechanical properties at high temperatures in alloys. However, the traditional method of creating serrated grain boundaries (SGBs), solution treatment followed by slow cooling, could induce a significant coarsening behavior of the second phase, thereby adversely affecting the properties. In this work, a new strategy is proposed to obtain numerous irregular SGBs without producing coarser Laves precipitates (<400 nm) in Fe-Cr-Al alloys, in which these SGBs are formed through recrystallization annealing of a warm-rolled microstructure featuring kink bands (KBs). These SGBs can be divided into two types: low amplitude SGBs (LA-SGBs, in the range of 1 similar to 0 mu m), and high amplitude SGBs (HA-SGBs, over 20 mu m). Through SEM and quasi in-situ EBSD observation, and combined with the Taylor factor model, the formation mechanism of irregular SGBs is revealed in detail. The pinning effect of Laves phase precipitated during annealing on the grain boundaries migration induces the formation of LA-SGBs. On the other hand, the discrepancy in deformation stored energy between the matrix and the KBs promotes the special nucleation and growth of new grains, thus resulting in the formation of HA-SGBs. Moreover, tensile tests are conducted at 298 K and 873 K. SGBs can significantly enhance ductility while maintaining strength, exhibiting an increase of 52.1% and 41.1% respectively. Compared to straight grain boundaries, at 298 K, SGBs can reduce the accumulation of the GNDs in the vicinity of themselves through the unique strain-hardening behavior mediated by high-density dislocation walls (HDDWs), alleviate the stress concentration, make the plastic strain distributions more uniform, and thus retard the crack initiation. As the deformation temperature rises to 873 K, the improved ductility is mainly ascribed to the deflection and passivation effects of SGBs on crack propagation during straining from necking to fracture while their effects on the strain-hardening stage are weakened.

New insights into ductility improvement of a nickel-based superalloy through grain boundary engineering

Improve the ductility of a nickel based superalloy by optimizing secondary phase distribution through grain boundary engineering

Study on Grain Boundary Characteristic Distribution of Nickel Base 625 Alloy Controlled by Deformation Heat-Treatment Process

Insight into Elongation and Strength Enhancement of Heat-Treated LPBF Ni-based Superalloy 718 Using In-Situ SEM-EBSD

On the Critical Strain of Thermal-Mechanical Processing to Tailor Grain Boundary Character Distribution in INCOLOY 925 Alloy

Grain boundary engineering of AL6XN super-austenitic stainless steel: Distinctive effects of planar-slip dislocations and deformation twins

A Possibility to Synchronously Improve the High-Temperature Strength and Ductility in Face-Centered Cubic Metals Through Grain Boundary Engineering

The Effect of Thermomechanical Treatment on the Evolution of the Grain Boundary Character Distribution in a Cr0.8MnFeNi High-Entropy Alloy

Significantly Enhancing Elevated-Temperature Strength and Ductility of a FeMnCoCr High-Entropy Alloy Via Grain Boundary Engineering: Exploring Multi-Deformation Mechanisms

Simultaneously Enhancing Strength and Ductility of High-Nb-containing TiAl Alloy Via Extrusion-Assisted Microstructure Tailoring

Gain Boundary Character Distribution Optimization of Cu-16at.%Al Alloy by Thermomechanical Process: Critical Role of Deformation Microstructure

Effect of Grain Boundary Engineering on the Work Hardening Behavior of AL6XN Super-Austenitic Stainless Steel

Tuning the Microstructure and Mechanical Properties of TiAl-based Alloy Through Grain Boundary Engineering

Quasi-in-situ Observation and Analysis of Grain Boundary Evolution of GH4169 Nickel-Based Superalloy During the Micro-Strain Stage of Thermal Deformation

Cryogenic deformation tailors the dislocation accumulation mode to modify grain boundary character distribution of Incoloy 925

Quasi-in-Situ Observation and Analysis of Grain Boundary Evolution of Gh4169 Nickel-Based Superalloy During Micro-Strain Stage of Thermal Deformation

Effect of Grain Boundary Engineering on Grain Boundary Character Distribution and Deformation Behavior of a TRIP-assisted High-Entropy Alloy

Effect of grain refinement and twin structure on the strength and ductility of Inconel 625 alloy

Improving Ductility in Ultrafine Grained Nickel with Porosity and Segregation Via Deformation

Effect of thermomechanical processing on microstructure characteristics of gamma-TiAl-based alloy

A novel strategy creating serrated grain boundaries to improve ductility in a Fe-Cr-Al alloy