Abstract:High‐performance all‐fluorescence white organic light‐emitting diodes (WOLEDs) are demonstrated. The WOLED with two emitting layers (EMLs) presents the external quantum efficiency (EQEmax) of 23.4%, with a color index (CRImax) of 83.1. In going from the two‐EMLs to the three‐EMLs and the tandem structure, the time to 50% of the initial luminance (LT50) increases from 601 to 714 and 1622 h. White organic light‐emitting diodes (WOLEDs) have been regarded as the candidates for next‐generation flat‐panel displays and solid‐state lighting due to their low cost. However, it is still challenging to achieve two‐component WOLEDs with high efficiency, high color index (CRI), and long lifetime. Here, high‐performance all‐fluorescence WOLEDs based on a blue fluorescent emitter and an orange thermally activated delayed fluorescent (TADF) emitter are demonstrated. The optimized all‐fluorescence WOLED with two EMLs presents the maximum external quantum efficiency (EQE), current efficiency (CE), and power efficiency (PE) of 23.4%, 40.2 cd A−1, and 33.2 lm W−1, corresponding to a maximum CRI value of 83.1 and Commission Internationale de L'Eclairage (CIE) coordinate of (0.30, 0.31). To further improve the device stability, the all‐fluorescence WOLEDs with three EMLs and tandem structure are constructed, respectively. Under the premise of ensuring efficiency, in going from the two‐EMLs to the three‐EMLs and the tandem structure, the LT50 (time to 50% of the initial luminance) of all‐fluorescence WOLEDs increase from 601 to 714 h and 1622 h at an initial luminance of 1000 cd m−2. These strategies and results present new insight into the design of all‐fluorescence WOLEDs with high efficiency, high CRI, and extended lifetime.

Demonstration of Wafer‐level White Light Emitting Diode with 92,000 Lm Luminous Flux

High-Power Single-Chip Gan-Based White Led with 3058 Lm

Fabrication and Characterization of High-power White LED

High Luminous Efficacy Phosphor-Converted Mass-Produced White LEDs Achieved by AlN Prebuffer and Transitional-Refraction-Index Patterned Sapphire Substrate

White Light Emitting Diode with High Colour Rendering Index of 98.3 by Blue Emissive Carbon Dots

High-Performance Top-Emitting White Organic Light-Emitting Devices

Wafer-level light emitting diode (WL-LED): An innovative approach for cost-effective very high power lighting

Electrical and Optical Properties of a High-Voltage Large Area Blue Light-Emitting Diode

High-quality all-fluorescent white organic light-emitting diodes obtained by balancing carriers with hole limit layer

Study of the White Light-emitting Diode and Its Integrated Lighting Source

High Brightness Silicon Nanocrystal White Light-Emitting Diode with Luminance of 2060 Cd/m2.

Wafer-Level Light Emitting Diode (WL-LED) Chip Simplified Package for Very-High Power Solid-State Lighting (SSL) Source

White Organic Light-Emitting Diodes Based on a Yellow Phosphorescence Iridium Complex and a High-Efficiency Blue Fluorescence

Stable All‐Fluorescence White Organic Light‐Emitting Diodes with High Efficiency and High CRI

Efficient Single-Emitting Layer Hybrid White Organic Light-Emitting Diodes with Low Efficiency Roll-Off, Stable Color and Extremely High Luminance

Fabrication of stacked color converter for high-power WLEDs with ultra-high color rendering

Broad-Band and Stable Phosphor-in-Glass Enabling Ultrahigh Color Rendering for All-Inorganic High-Power WLEDs

All-fluorescence white organic light-emitting diodes with record-beating power efficiencies over 130 lm W‒1 and small roll-offs

Very-High Color Rendering Index Hybrid White Organic Light-Emitting Diodes with Double Emitting Nanolayers

Reliable and Efficient Phosphor-in-Glass-Based Chip-Scale Packaging for High-Power White LEDs

Realizing White LEDs with High Luminous Efficiency and High Color Rendering Index by Using Double Green Phosphors