Abstract:Through a tailored melt‐annealing procedure, single‐crystalline (110)‐oriented Li0.9Mg0.1 (denoted as LiMg(110)) alloy anode is obtained to exhibit enhanced Li atoms diffusion kinetics and behavior. As a result, the all‐solid‐state battery with LiNi0.8Co0.1Mn0.1O2 cathode, LiMg(110) anode, and Li3InCl6 exhibit long‐cycle stability over 160 cycles with 80% capacity retention, showing enormous potential of crystallographic regulatory strategy. All solid state lithium metal batteries (ASSLMBs) with enhanced energy density has driven the exploration of Li‐alloy anodes such as Li‐Mg alloy owing to its solid‐solution structure and high theoretical specific capacity. But the Li atom diffusion limitation on Li‐Mg electrode surface further leads to sluggish atoms transport dynamics. Herein, single‐crystalline (110)‐oriented Li0.9Mg0.1 (denoted as LiMg(110)) anode is obtained by a tailored melt‐annealing procedure to tackle the above issues. Theoretical analyses and experimental results demonstrate that the crystallographic structural (110) orientation of LiMg anode can facilitate Li atom diffusion and guarantee the electrode stability during deep cycling. As a result, the LiMg(110) electrode exhibits longer cycle life with lower overpotential than polycrystalline LiMg at high current densities and areal capacities in symmetric cells. A critical current density (CCD) at the forefront of 2.5 mA cm−2 is achieved in Li3InCl6 (LIC) solid‐state system. The ASSLMB with high areal capacity (3.8 mAh cm−2), high current density (0.76 mA cm−2), and low negative/positive capacity N/P ratio (2.14) achieves exceptional cyclability over 160 cycles. The outcomes highlight a promising crystallographic regulation strategy toward practical applications of high‐performance lithium metal batteries.

Li : Mg Alloy with Variable Work Function As Highly Efficient Cathode for Organic Light-Emitting Devices

A highly transparent laminated composite cathode for organic light-emitting diodes

Formation, Confirmation and Application of Li : Al Alloy As an Electron Injection Layer with Li3N As the Precursor

Enhanced Electroluminescence from Silicon-Based Light-Emitting Devices with Mg0.4zn0.6o/Erbium-Doped Zno Heterostructures by Using Ito/Moo3 Combined Anode

[High Contrast Organic Light-Emitting Diodes Using Pb-Lif As Cathode].

Lithium Cobalt Oxide As Electron Injection Material for High Performance Organic Light-Emitting Diodes

Highly Efficient Top-Emitting Organic Light-Emitting Devices with Aluminium Electrodes

Novel Cs2co3:Ag/Ag Cathode for High-Efficiency Organic Light-Emitting Diodes

Electro-optical performance of molybdenum oxide modified aluminum doped zinc oxide anodes in organic light emitting diodes: A comparison to indium tin oxide

Improved Performance of Organic Light-Emitting Diodes with MgF 2 As the Anode Buffer Layer

Enhancement of Electron Injection in Organic Light-Emitting Devices Using an Ag/LiF Cathode

Investigation of Novel Efficient Electron Injection Lithium Complex Containing Quinoxaline Moiety for Organic Light-Emitting Diodes

P-159: Decomposable Alkali Compounds for Transparent Cathodes in OLEDs

Single‐Crystalline LiMg Alloy Anode for Deep Cycling All Solid State Lithium Metal Batteries

Regulating Li transport in Li-magnesium alloy for dendrite free Li metal anode

Work function tunning of lithium-doped vanadium oxide for functioning as hole injection layer in organic light-emitting diodes

Highly Efficient Organic Light Emitting Devices with Insulator MnO As an Electron Injecting and Transporting Material

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Decomposable Alkali Compounds For Transparent Cathodes In Oleds

High-Efficiency Microcavity Top-Emitting Organic Light-Emitting Diodes Using Silver Anode

Highly Efficient Blue-Green Organic Light-Emitting Diodes Achieved by Controlling the Anionic Migration of Cationic Iridium(Iii) Complexes