Abstract:Pre-oxidizing of the B4C particles can regulate the thickness of the interfacial oxide layer between the B4C particles and the Al alloy matrix in the B4C/Al composites by adjusting the oxidation temperature and time. This paper studied the effect of oxidation temperature and time on the oxide layer of the B4C particles, which was oxidized at 500 degrees C similar to 650 degrees C in air quantitatively. Taking the pre-oxidized B4C particles as raw reinforcements, the B4C/Al composites with a volume fraction of 15% were prepared by hot pressed sin-tering method, and the interfacial microstructure and tensile properties of the composites were discussed. The results show that the amorphous oxide layers with different average thickness are produced at the interface of the composites, which prepared by the B4C particles through different oxidation processes, and the average thickness of the oxide layer has a great influence on the fracture elongation of the B4C/Al composites. When the average thickness of the oxide layer is 9.6 nm, the composites show the highest value of the fracture elongation (4.2%), 50% and 147% higher than that in the composites with the average thickness of 0 and 37.6 nm. By designing the thickness of the interfacial oxide layer, it is expected to realize the regulation of the tensile properties of the B4C/Al composites. \(c) 2022 Elsevier B.V. All rights reserved.

Influence of Hydrothermal Treatment on the Microstructure and Oxidation Resistance of a Zn4B2O7·H2O (4zno·b2o3·h2o) Coating for C/C Composites

Antioxidant modification of C/C composites by in situ hydrothermally synthesized 4ZnO·B2O3·H2O

Antioxidant modification of C/C composites by in situ hydrothermally synthesized 4ZnO center dot B2O3 center dot H2O

Influence of Solvothermal Treatment Time on Oxidation of Carbon/Carbon Composites Containing Zrb2 Micro-Particles

A ZrB2–SiC/SiC Oxidation Protective Dual-Layer Coating for Carbon/carbon Composites

High temperature oxidation resistance of Y2O3 modified ZrB2-SiC coating for carbon/carbon composites

Oxidation Protection and Behavior of In-Situ Zirconium Diboride–silicon Carbide Coating for Carbon/carbon Composites

A Chromium Carbide Coating In-Situ Formed on C/C Composites by the Novel Reactive Wetting Strategy to Enhance Oxidation Resistance

ZrB 2 -Sic-ta 4 HfC 5 /ta 4 HfC 5 Oxidation-Resistant Dual-Layer Coating Fabricated by Spark Plasma Sintering for C/C Composites

Microstructure and Oxidation Resistant Property of C/C Composites Modified by SiC–MoSi2–CrSi2 Coating

Effect of heat-treatment on the oxidation resistance of Mo-Si-N coating for C/C composites

Enhanced Ductility of B4C/Al Composites by Controlling Thickness of Interfacial Oxide Layer Through High Temperature Oxidation of B4C Particles

Preparation of a multi-composition coating for oxidation protection of modified carbon-bonded carbon fiber composites by a rapid sintering method

Microstructure And Oxidation Resistance Of Carbon/Carbon Composites Coated With Si3n4-Si/Mosi2-Sic Multi-Layers By Slurry Coating And Post Heat-Treatment Process

Effect of the Y2O3 amount on the oxidation behavior of ZrB2-SiC-based coatings for carbon/carbon composites

Oxidation Protection Of Zrb2-Sic Modified Carbon-Bonded Carbon Fiber Composites

Enhanced Ductility by Controlling Thickness of Interfacial Oxide Layer in B4c/Al Composites

SiC_n/SiC Multilayer Oxidation Protective Coatings for C/C Composites Prepared by a Hydrothermal Electrophoretic Deposition Process

Oxidation Pre-Treatment to Improve the Mechanical Property and Oxidation Resistance of Si–Mo–Cr Coated C/C Composites

Preparation, Mechanical Properties and Cyclic Oxidation Behavior of the Nanostructured NiCrCoAlY-TiB2 Coating

Preparation of oxidation protective ZrB 2 –SiC coating by in-situ reaction method on SiC-coated carbon/carbon composites