Abstract:A double-layer coating composed of MoSi2-SiO2-SiC/ZrB2-MoSi2-SiC was designed and successfully constructed by a novel combination of precursor pyrolysis assisted sintering and rapid sintering to improve the ablation resistance of SiOC ceramic modified carbon fiber needled felt preform composites (CSs). The ZrB2-MoSi2-SiC inner layer coating was in relatively uniform distribution in the zone of 0-3 mm from the surface of CSs through the slurry/precursor infiltration in vacuum and SiOC precursor pyrolysis assisted sintering, which played a predominant role in improving oxidation and ablation resistance and maintaining the morphology of CSs. The MoSi2-SiO2-SiC outer layer coating was prepared by the spray and rapid sintering to further protect CSs from high-temperature oxidation. The ablation resistance of CSs coated with double-layer coating was evaluated by an oxygen-acetylene ablation test under the temperature of 1600-1800 degrees C with different ablation time of 1000 and 1500 s. The results revealed that the mass recession rates increased with the rise of ablation temperature and extension of ablation time, ranging from 0.47 g/(m(2).s) to 0.98 g/(m(2).s) at 1600-1800 degrees C for 1000 s and from 0.72 g/(m(2).s) to 0.86 g/(m(2).s) for 1000-1500 s at 1700 degrees C, while the linear recession rates showed negative values at 1700 degrees C due to the formation of oxides, such as SiO2 and ZrO2. The ablation mechanism of the double-layer coating was analyzed and found that a SiO2-ZrO2-Mo4.8Si3C0.6 oxidation protection barrier would be formed during the ablation process to prevent the oxygen diffusion into the interior CSs, and this study provided a novel and effective way to fabricate high-temperature oxidation protective and ablation resistant coating.

Preparation of a multi-composition coating for oxidation protection of modified carbon-bonded carbon fiber composites by a rapid sintering method

Oxidation Protection Of Zrb2-Sic Modified Carbon-Bonded Carbon Fiber Composites

Multi-composition Coating for Oxidation Protection of Modified Carbon-Bonded Carbon Fiber Composites

A ZrB2–SiC/SiC Oxidation Protective Dual-Layer Coating for Carbon/carbon Composites

Formation and Oxidation Behavior of Mo-Si-B Composite Coatings with B-rich Interlayer Prepared by Slurry Sintering Method

A Multilayer MoSi2–SiC–B Coating to Protect SiC-coated Carbon/carbon Composites Against Oxidation

A dense ZrB2-SiC-Si/SiC-Si coating to protect carbon/carbon composites against oxidation at 1773 K and 1973 K

A Novel Combination of Precursor Pyrolysis Assisted Sintering and Rapid Sintering for Construction of Multi-Composition Coatings to Improve Ablation Resistance of SiOC Ceramic Modified Carbon Fiber Needled Felt Preform Composites

Microstructure, Surface Emissivity and Ablation Resistance of Multilayer Coating for Lightweight and Porous Carbon–bonded Carbon Fiber Composites

ZrB2 particles reinforced glass coating for oxidation protection of carbon/carbon composites

Preparation and performance study of oxidation resistant coating on carbon fiber reinforced ceramic matrix composites

Oxidation Protection and Behavior of In-Situ Zirconium Diboride–silicon Carbide Coating for Carbon/carbon Composites

ZrB2–SiC Gradient Oxidation Protective Coating for Carbon/carbon Composites

Microstructure And Oxidation Resistance Of Carbon/Carbon Composites Coated With Si3n4-Si/Mosi2-Sic Multi-Layers By Slurry Coating And Post Heat-Treatment Process

Preparation of oxidation protective ZrB 2 –SiC coating by in-situ reaction method on SiC-coated carbon/carbon composites

Combined Zr and Y Phosphate Coatings Reinforced with Chemically Anchored B2O3 for the Oxidation Inhibition of Carbon Fiber

Oxidative protection of a carbon-bonded carbon fiber composite with double-layer coating of MoSi2-SiC whisker and TaSi2-MoSi2-SiC whisker by slurry method

Oxidation Protection of Carbon Fiber by Sol-Gel Derived Boron Doped Yttria Stabilized Zirconia Coatings

A Thick SiC-Si Coating Prepared by One-Step Pack Cementation for Long-Term Protection of Carbon/carbon Composites Against Oxidation at 1773 K

Oxidation Protection of C/C Composites with a Multilayer Coating of SiC and Si + SiC + SiC Nanowires

Microstructure and Oxidation Resistant Property of C/C Composites Modified by SiC–MoSi2–CrSi2 Coating