Abstract:As a key tool in hydraulic fracturing, the packer plays a vital role in the process of unconventional oil and gas production. Its sealing performance has a significant impact on production. The packer is in high-temperature and high-pressure (HTHP) environment for a long time. It is easy to produce significant stress relaxation, which affects the sealing performance of the packer. In this paper, rubber foundation tests at 150 °C temperature were carried out. The hyperelastic–viscoelastic model of the rubber material was determined. The influence of the stress relaxation on its sealing performance was investigated. In addition, the effects of setting load, height, inner diameter, and outer diameter on the sealing performance were systematically investigated. The findings show that under HTHP, the stress relaxation phenomenon leads to a 6.9% decrease in peak shear stress, 10.3% decrease in peak von Mises stress, and 6.7% decrease in peak contact stress, reducing the risk of damage to the packing element and leading to a decrease in its sealing performance. In addition, it was found that increasing the setting load can significantly increase the contact stress, which also increases the risk of damage. When increasing the height, the peak shear stress and peak contact stress do not change much but can significantly reduce the peak von Mises stress. When increasing the inner diameter, the peak shear stress and peak contact stress show a trend of first increasing and then decreasing, and the peak von Mises stress has been decreasing. Increasing the outer diameter can better improve the force situation, increase the contact stress, and make the contact stress distribution more uniform. It is necessary to consider the influence of stress relaxation on the sealing performance of the packer under HTHP; meanwhile, this paper has guiding significance for the design of packer structures.

Study on the geometric and hydraulic properties about TP ringlike packing

Hydrodynamics of New Structured Packings: an Experimental and Micro-scale CFD Study

Study on Mix Proportion Design Method of Concrete Based on the Theory of High Packing

MODEL EXPERIMENTAL STUDY OF FILLING PROPERTY OF GEOTEXTILE TUBE

Modeling and analyzing on pressure distribution of plane port pair based on disk-shape gap

Studies on a New Random Packing—Plum Flower Mini Ring

Performance measurement and evaluation for five types of packing

Study on Absorption Performance at High Liquid Loads using a Novel Random Packing: Super Mini Ring

Study on Analysis of Ring-Pack Lubricating Oil Consumption and Improved Design

Intensification of Random Packing Via CFD Simulation, PIV Measurement and Traditional Experiments

Pressure drop model for the new-type high efficiency packing

Experimental Study on Frictional and Sealing Performances of Packing Rings in an Oil-Free Gas Compressor

Analysis on Sealing Performance for a New Type of Rubber Olecranon-Shaped Sealing Ring in Pipe Jacking Joint

Study on Performance of QH-1 Mini Ring Packing at high Liquid-Gas Ratio

A fast evaluation method for surface area, volume fraction, and hydraulic diameter of TPMS with different geometric characteristics

Study on reinforced thermoplastic pipe under combined tension and internal pressure

Experimental research on the sealing ability of borehole packers

Research on the Influence of Stress Relaxation on the Sealing Performance of the Packer Under HTHP

Calculation of flooding velocity in packed extraction tower

Liquid dispersion behaviors in a rotating packed bed with different packing arrangements: A comparison study

Design and Finite Element Analysis of Composite PTFE Compression Packing with C-shape Structure