Abstract:To enhance the reliability and to extend service life of packing rings, tribological and sealing performances are investigated based on the experimental results. Friction force, leakage rate and power consumption of three materials of pressure packing seals are measured in a refitted vertical gas compressor. The rings are made of common filled polytetrafluroethylene (Filled PTFE), PTFE reinforced with 30% mass fraction carbon fiber (30%CF+PTFE), and carbon-carbon composites infiltrated with PTFE (C/C+PTFE), respectively. It is found that packing rings will periodically vibrate with the periodic vibration of pressure packing after the travel direction of motion abruptly turns to the reverse direction. Furthermore, the amplitude of vibration slows down with the increasing crank angle. Approximate value of friction force is available by multiple-point fast Fourier transformation (FFT) employed to process the experimental results by reducing the impact of vibration to a great extent. Of three materials of rings employed in experiments, Filled PTFE presents minimal leakage rate accompanied with maximum power consumption. And 30%CF+PTFE exhibits minimum friction power and moderate leakage rate. As for C/C+PTFE, its high mechanical and thermal properties are favorable factors to enhance the ability of operating under high pressure and velocity and to improve the wear resistance. Unfortunately, this also leads to a large leakage rate. Comprehensive consideration should be taken into to evaluate the availability, reliability and service life for a type of packing ring under dry running conditions.

Performance measurement and evaluation for five types of packing

Hydrodynamics of New Structured Packings: an Experimental and Micro-scale CFD Study

Intensification of Random Packing Via CFD Simulation, PIV Measurement and Traditional Experiments

Studies on a New Random Packing—Plum Flower Mini Ring

Comparative Study on the Characteristics of Film Flow with Different Corrugation Plates

Study on Performance of QH-1 Mini Ring Packing at high Liquid-Gas Ratio

Sealing Performance Analysis of Deep-Sea Sediment Sampler

Performance Characteristics of a New Spherical Metal Mesh Packing

Experimental Study on Metal Gauze Corrugated Packing with High Specific Area

Performance,manufacture and application of SQ-type packing in the industry process

Study on Absorption Performance at High Liquid Loads using a Novel Random Packing: Super Mini Ring

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Experimental Study on Frictional and Sealing Performances of Packing Rings in an Oil-Free Gas Compressor

Experiment and numerical study on thermal performance of counterflow wet cooling tower filled with double S-wave packing

Study on the geometric and hydraulic properties about TP ringlike packing

Effect of Fiber Packing Density on Performance and Mass Transfer of Hollow Fiber Membrane Contactor

Mass transfer performance of metal sheet structured packings in CO2 absorption tower

A new approach to intensify the structured packing

Multi-scale study of wet pressure drop model for a novel structured wire gauze packing

Packing Size Effect on the Liquid Circulation Property in an External-Loop Packed Bubble Column

Study and analysis of mechanism structure test of metal packer