Abstract:In order to avoid disk failure to cause uncontained accidents, the containment capability of cylindrical case to the disk frgments must experimentally be investigated, and the impact, deformation, penetration or perforation of the case must be studied in detail. The results of three containment tests of disk fragments were proposed by the ZUST1 high-speed rotor spin testing facility in High-speed Rotating Machinery Laboratory of Zhejiang University. Before testing, the prefabricating cracks were cut at three positions separated in 120° to make the disk cracked at the predicted speed; a special automatic control and monitor system was used to record the instantaneous rotating speed as the disk was bursted. The tested results show that, when the disk fragments impact the cylindrical case of the different wall thicknesses at the same instantaneous speed, the different failure modes of the case occur obviously, in which the failure modes of the thin wall case are shearing, tensioning and plastic deformation, the mode of the thick is whole plastic deformation. The numerical simulations were correspondingly carried out using the nonlinear finite element method MSC. Dytran to study the impact process and failure mode. The simulated results show a good agreement with the test results, which indicates that nonlinear finite element method can be used as a reliable tool for containment structure design of disk fragments.

Containment Tests and Analysis of Soft Wall Casing Fabricated by Wrapping Kevlar Fabric Around Thin Metal Ring

Containment of soft wall casing wrapped with Kevlar fabric

Containment Capability of 2D Triaxial Braided Tape Wound Composite Casing for Aero‐engine

INVESTIGATION ON CONTAINMENT PROCESS OF CASE WRAPPED WITH KEVLAR FABRIC

Characteristics and mechanisms of turboshaft engine axial compressor casing containment

Simulation Methodology Development for Rotating Blade Containment Analysis

Ballistic testing and theoretical analysis for perforation mechanism of the fan casing and fragmentation of the released blade

Multi-Blade Effects on Aero-Engine Blade Containment

Experimental study of real casing containment

Containment Ability of Kevlar 49 Composite Case under Spinning Impact

Ballistic impact testing and analysis of triaxial braided composite fan case material

Penetration of Disk Fragments Following Impact on Thin Plate

Containment Ability and Groove Depth Design of U Type Protection Ring

Mechanical Analysis and Reasonable Design for Ti-Al Alloy Liner Wound with Carbon Fiber Resin Composite High Pressure Vessel

Study on the Numerical Simulation Methodology of Kevlar Fabric Wraps Structure under the Impact of High-Speed Rotating Blade

Experimental Study and Numerical Simulation of Model Casing Containment

Experimental study of cylindrical case impacted by disk fragments

Numerical simulation methodology of multi-layer Kevlar 49 woven fabrics in aircraft engine containment application

Perforation of aero-engine fan casing by a single rotating blade

INVESTIGATION ON BLADE CONTAINMENT OF AERO-ENGINE COMPOSITE CASE

Containment of High-Speed Rotating Disk Fragments