Abstract:Experimental and simulation results show that the increase in volume fraction of KFRP grows the critical penetration velocity of C/K hybrid composite laminates and that KFRP is better as an impact surface. This study investigated the high‐velocity impact behavior of composite plates with different hybrid ratios and structural configurations through experimental and numerical simulation studies. The results showed that the critical penetration velocity of the composite plate generally increases with an increase in the volume fraction of aramid fibers. The high‐velocity impact finite element model developed in this study accurately simulated the high‐velocity impact behavior of laminated fiber composite plates with various hybrid ratios and different structures. The impact failure patterns of the plates were analyzed, and it was observed that the carbon fibers on the back face were prone to tensile fracture, followed by the gradual fracture of aramid fibers. The numerical simulation results show significant differences in residual impact velocity and energy absorption when impacted from different sides and the impact from the aramid side resulted in better energy absorption, which is contrary to the findings in many existing research papers. These findings provide valuable insights into the impact resistance of composite materials and can guide the design and development of high‐performance composite structures for aero‐engine case designing. Highlights The high‐velocity impact behavior of C/K fiber epoxy resin matrix composite laminates are studied. The critical penetration velocity increases with the increase of aramid fiber volume fraction. The laminate absorbs most of the impact energy during the instantaneous impact time. Energy absorption ability is better when the impact surface is aramid fibers. Carbon fibers on the back side of the laminate are more prone to tensile fracture.

Containment Ability of Kevlar 49 Composite Case under Spinning Impact

Containment Capability of 2D Triaxial Braided Tape Wound Composite Casing for Aero‐engine

Containment Tests and Analysis of Soft Wall Casing Fabricated by Wrapping Kevlar Fabric Around Thin Metal Ring

Ballistic impact testing and analysis of triaxial braided composite fan case material

Simulation Methodology Development for Rotating Blade Containment Analysis

INVESTIGATION ON CONTAINMENT PROCESS OF CASE WRAPPED WITH KEVLAR FABRIC

Containment of soft wall casing wrapped with Kevlar fabric

Impact response and damage evolution of triaxial braided carbon/epoxy composites. Part I: Ballistic impact testing

Review of Aero-Engine Case Containment Research

Multi-Blade Effects on Aero-Engine Blade Containment

Characteristics and mechanisms of turboshaft engine axial compressor casing containment

NUMERICAL SIMULATION OF A THIN PLATE IMPACTED BY BLADE PROJECTILE

Damage process of composite aero-engine case impacted by blade

Ballistic testing and theoretical analysis for perforation mechanism of the fan casing and fragmentation of the released blade

INVESTIGATION ON BLADE CONTAINMENT OF AERO-ENGINE COMPOSITE CASE

Numerical simulation methodology of multi-layer Kevlar 49 woven fabrics in aircraft engine containment application

Study on the Numerical Simulation Methodology of Kevlar Fabric Wraps Structure under the Impact of High-Speed Rotating Blade

Aeroengine turbine blade containment tests using high-speed rotor spin testing facility

High‐velocity impact resistance and energy absorption behavior of Carbon‐Kevlar hybrid composite laminates

Perforation of aero-engine fan casing by a single rotating blade

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes