Abstract:Two‐dimensional (2D) triaxial braided composites have been successfully used in aero‐engine fan containment system for weight reduction. In the current study, blade containment tests were conducted on high‐speed rotor spin tester to investigate the containment process and failure mechanisms of the composite casing. The composite casing was fabricated by winding 2D carbon fiber triaxial braided tape on a capstan into predetermined thickness and then infused with epoxy resin. Test results indicate that the damages to the containment casing increase significantly with the increase in blade released speed. In contained case, two damaged areas can be observed on the inner wall of the casing due to continued impacts of the released blade. However in uncontained case, a perforated hole was found in the casing. Finite element method was used to study this high‐speed impact process using LS‐DYNA. The influence of blade release speed and case thickness was also analyzed and found that the failure modes turns from tension to shear as the blade speed increases and casing is able to absorb more energy with increase in casing areal density. An empirical equation was derived for the triaxial braided composite casing, which can help in the design of the composite fan casing for aero‐engine. POLYM. COMPOS., 37:2227–2242, 2016. © 2015 Society of Plastics Engineers

INVESTIGATION ON BLADE CONTAINMENT OF AERO-ENGINE COMPOSITE CASE

NUMERICAL SIMULATION OF A THIN PLATE IMPACTED BY BLADE PROJECTILE

Simulation Methodology Development for Rotating Blade Containment Analysis

Containment Capability of 2D Triaxial Braided Tape Wound Composite Casing for Aero‐engine

Review of Aero-Engine Case Containment Research

Multi-Blade Effects on Aero-Engine Blade Containment

Characteristics and mechanisms of turboshaft engine axial compressor casing containment

Ballistic testing and theoretical analysis for perforation mechanism of the fan casing and fragmentation of the released blade

Experiment and numerical simulation of anti-penetration performance of composite structures

Ballistic impact testing and analysis of triaxial braided composite fan case material

Containment Tests and Analysis of Soft Wall Casing Fabricated by Wrapping Kevlar Fabric Around Thin Metal Ring

Damage process of composite aero-engine case impacted by blade

Penetration of Disk Fragments Following Impact on Thin Plate

INVESTIGATION ON CONTAINMENT PROCESS OF CASE WRAPPED WITH KEVLAR FABRIC

Experimental Investigation and Numerical Simulation of Aeroengine Blade Containment

Research on response mechanism of impact of aero-engine blade against fan case

Numerical analysis of real aero-engine first-stage fan blade containment

Experimental Study and Numerical Simulation of Model Casing Containment

Perforation of aero-engine fan casing by a single rotating blade

Impact response and damage evolution of triaxial braided carbon/epoxy composites. Part I: Ballistic impact testing

Containment Ability of Kevlar 49 Composite Case under Spinning Impact