Abstract:In order to gain a better understanding of the membrane's role in the whole process of mass-transfer in membrane gas–liquid contacting systems, PVDF microporous hollow fiber membranes have been fabricated using three different dope solutions containing N-methyl-2-pyrrolidone (NMP) and different additives. The resultant hollow fibers with different structures were used to make membrane modules, which were then applied as gas–liquid membrane contactors for CO2 absorption in water. The membranes were characterized and the effect of membrane structure on the mass-transfer was analysed accordingly.It was found that the additives used imposed a significant effect on the final membrane structure under the same spinning conditions. Compared with distilled water, phosphorous acid and glycerol showed a stronger pore-inducing ability. As a result, the membrane #1 or #2 made by the dope with phosphorous acid or glycerol as an additive had a larger pore size and a higher value of MWCO. The finger-like pores also occupied a larger portion on the membranes #1 and #2 than on the membrane #3, which used distilled water as an additive. Moreover, the membranes #1 and #2 presented a much wider pore size distribution than the membrane #3.The different membrane structures turned out to affect CO2 absorption performance when used as contactors. Since the ratio of the membrane resistance over the overall mass-transfer resistance was increased in the order of #1<#2<#3, with respect to the reductions of MWCO and the finger-like pore portion of these three membranes in the same sequence, the CO2 absorption performance was in the sequence of #1>#2>#3. In addition, it was noticed that all the membranes exhibited considerable membrane resistances from 22% to 36% though the model system used was pure CO2 absorption in distilled water. The partial wetting was probably caused by the capillary condensation of water vapour in the membrane pores instead of water penetration, as the experiment shows that the CO2 flux of three PVDF membranes was kept almost unchanged over 15 days of operation. In comparison with a commercial double skin layer PVDF membrane, it was found that the membrane with an inner skin-free structure plus a porous substrate is favourable to be used in the membrane gas–liquid contacting process.

Effect of Fiber Packing Density on Performance and Mass Transfer of Hollow Fiber Membrane Contactor

Effect of packing density of hollow fiber contactors on shell-side mass transfer in distillation

Effect of coating based on various hollow fiber packings on distillation of IPA/water system

Distillation of Methanol–water Solution in Hollow Fibers

Physicochemical Characteristics of Hollow Fiber Structured Packings in Isopropanol/Water Distillation

Analysis on the structure of different hollow fiber membrane contactors

Ethanol-water Separation in Hollow Fiber Membrane Contactor

Mass Transfer Process of Co2 Absorption Through Non-Porous Hollow Fibre Contactor

NUMERICAL SIMULATION OF EFFECT OF HOLLOW FIBER PACKING DENSITY ON MASS TRANSFER IN DIALYZERS

Effects of baffles on separation of aqueous ethanol solution with hollow fibers

Numerical investigation of the effects of polypropylene hollow fibre membrane structure on the performance of CO2 removal from flue gas

Effect of Membrane Structure on Mass-Transfer in the Membrane Gas–liquid Contacting Process Using Microporous PVDF Hollow Fibers

Distillation Performance of Using PVA/PAN Hollow Fiber Composite Membrane As Packing to Separate the Ethanol-Water Solution

Effect of Random Packing on Shell-Side Flow and Mass Transfer in Hollow Fiber Module Described by Normal Distribution Function

Separation of Alcohol−Water Solutions by Distillation Through Hollow Fibers

Influence of Random Arrangement of Hollow Fiber Membranes on Shell Side Mass Transfer Performance: A Novel Model Prediction

Effect of Packing Nonuniformity at the Fiber Bundle–Case Interface on Performance of Hollow Fiber Membrane Gas Separation Modules

Experimental And Numerical Analyses On The Poly(Lactide-Co-Glycolide) Hollow Fiber Membranes

Diverse Morphologies of PVDF Hollow Fiber Membranes and Their Performance Analysis As Gas/liquid Contactors

Shell Side Mass Transfer Characteristics in a Parallel Flow Hollow Fiber Membrane Module

Numerical Simulation of the Shell-Side Mass Transfer of Randomly Packed Hollow Fiber Modules with Constant Fiber Wall Concentration