Abstract:Non-uniform flow in the hollow fiber membrane modules is believed to cause non-ideal performance of the module. To investigate the relationship between the module design and performance, a novel CFD model was developed to analyze numerically the effect of inlet manifold on the energy consumption and flow distribution for the module. The CFD results were compared with the experimental data and a good agreement between them was obtained. Eight manifolds were chosen as cases in the CFD simulation. The flow field in the shell and lumen sides and the flux distribution in the porous membrane zone were revealed by the CFD simulation. An adapted model has been proposed to account for the energy consumption distribution between the manifold and the fiber bundle. The manifold can consume a considerable portion of the overall energy with an improper structure design. When the fractional hole area of the inlet are 0.64%, 43.42%, and 100%, the proportion of the energy consumed by the manifold are 95%, 51%, and 7%, respectively. The non-uniform flow from the shell manifold to the module results in uneven velocity and pressure distributions in the shell side. However, the effect of the manifold structure on the flow distribution in the lumen side appears to be negligible. The flux distribution has a three-dimensional non-uniformity. The high velocity from the manifold opening to the module causes a high local flux at the beginning of the fiber, whereas the flow impingement on the dead end and the pressure drop in the lumen side results in a high local flux at the end of the fiber. The uniformity of the flux distribution depends on the flow distribution in the shell side with given fiber properties. For the specific hollow fiber membrane module in the present study, the inlet holes should be evenly distributed at the cross section to achieve uniform flow distribution in the module. To reduce the energy consumption, the fractional hole area should be as high as possible. The CFD model and the mechanism of how the inlet manifold affects the performance of the module will be beneficial to the structure design and optimization of the hollow fiber membrane modules.

Effect of Packing Nonuniformity at the Fiber Bundle–Case Interface on Performance of Hollow Fiber Membrane Gas Separation Modules

Effect of Fiber Packing Density on Performance and Mass Transfer of Hollow Fiber Membrane Contactor

Effect of hollow fiber membrane packing on the performance of modules formed with fiber tows

CFD simulations of fiber-fiber interaction in a hollow fiber membrane bundle: Fiber distance and position matters

Effects of Fiber Bundle Nonuniformity on Dehumidification Performance and Energy Efficiency of Pressure‐driven Membrane Modules

Effect of the Inlet Manifold on the Performance of a Hollow Fiber Membrane Module-a CFD Study

NUMERICAL SIMULATION OF EFFECT OF HOLLOW FIBER PACKING DENSITY ON MASS TRANSFER IN DIALYZERS

Turbulent heat and mass transfer across a hollow fiber membrane bundle considering interactions between neighboring fibers

CFD Study on the Performance of Hollow Fiber Ultrafiltration Membrane Modules with Different Fiber Arrangement

Analysis on the structure of different hollow fiber membrane contactors

Effect of packing density of hollow fiber contactors on shell-side mass transfer in distillation

Flow behavior and mass transfer of humid air across fiber membrane bundles

Fundamental Understanding of the Effect of Air-Gap Distance on the Fabrication of Hollow Fiber Membranes

Preparation of Pilot-Scale Inner Skin Hollow Fiber Pervaporation Membrane Module: Effects of Dynamic Assembly Conditions

Effect of Random Packing on Shell-Side Flow and Mass Transfer in Hollow Fiber Module Described by Normal Distribution Function

Influence of Random Arrangement of Hollow Fiber Membranes on Shell Side Mass Transfer Performance: A Novel Model Prediction

Experimental And Numerical Analyses On The Poly(Lactide-Co-Glycolide) Hollow Fiber Membranes

Numerical Simulation of the Shell-Side Mass Transfer of Randomly Packed Hollow Fiber Modules with Constant Fiber Wall Concentration

Computational Analysis of the Effects of Fiber Deformation on the Microstructure and Permeability of Blood Oxygenator Bundles

An Improved Permeation Model for Solution–Diffusion‐Based Hollow Fiber Gas Separation Membrane: Implementation and Analysis

Modeling of hollow fiber facilitated transport membrane modules for post combustion carbon capture process: Evaluation of non-ideal effect and module characteristic