Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Numerical Simulation of the Shell-Side Mass Transfer of Randomly Packed Hollow Fiber Modules with Constant Fiber Wall Concentration

Shell-side Mass Transfer Coefficient in Randomly Packed Hollow Fiber Bundles

Influence of Random Arrangement of Hollow Fiber Membranes on Shell Side Mass Transfer Performance: A Novel Model Prediction

NUMERICAL SIMULATION OF EFFECT OF HOLLOW FIBER PACKING DENSITY ON MASS TRANSFER IN DIALYZERS

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Effect of packing density of hollow fiber contactors on shell-side mass transfer in distillation

Effect of Random Packing on Shell-Side Flow and Mass Transfer in Hollow Fiber Module Described by Normal Distribution Function

Effect of Fiber Packing Density on Performance and Mass Transfer of Hollow Fiber Membrane Contactor

Theoretical Estimation of Shell-Side Mass Transfer Coefficient in Randomly Packed Hollow Fiber Modules with Polydisperse Hollow Fiber Outer Radii

Shell Side Mass Transfer Characteristics in a Parallel Flow Hollow Fiber Membrane Module

Characteristics of shell-side mass transfer with hollow fibers random distribution in dialyzer

Numerical simulation for character of fluid flow through packed bed

Effect of Wall on Mass Transfer Coefficient of Hollow Fiber Dialyzers

Hydrodynamics of New Structured Packings: an Experimental and Micro-scale CFD Study

Comparative Study on the Characteristics of Film Flow with Different Corrugation Plates

Calculation of shell-side mass transfer coefficient in hollow fiber dialyzer

Analysis on the structure of different hollow fiber membrane contactors

Numerical simulation of wall effect in randomly packed bed with low tube to particle diameter ratio

Numerical Simulation of Shell-Side Flow in Hollow Fiber Modules

Numerical analysis of fluid flow and heat transfer in various composite packed beds

Flow distribution in a randomly packed hollow fiber membrane module