Abstract:To improve the permeate flux and to keep the advantage of the high thermal efficiency in air gap membrane distillation (AGMD) for desalination, the optimal design of countercurrent AGMD of the hollow fiber module (AGMD-HF) is proposed. The module is basically composed of hydrophobic porous fiber tubes for feed flow and nonporous tubes for cold flow. The set of mathematical model equations for the entire module is derived from rigorous mass, momentum, and energy balances of both the feed side and the cold side coupled with the simultaneous mass and heat transfer across the membrane. The temperatures across the membrane and along the length of the module are simulated. The sensitivity of the process performance to operating conditions along the fiber length is investigated over a range of temperature and the flow rate. It is found that in the AGMD-HF domain, air/vapor dominates the heat and mass transfer resistances, which are comparable with the available experimental results in the literature. An attempt is then made to adjust the packing density and the surface ratio of the hot porous fibers to the cold nonporous fibers in order to maximize the process performance. Based on the trade-off between productivity and the thermal efficiency under module parameters, optimal design of AGMD-HF using Pareto solutions and the genetic algorithm is finally carried out. The obtained optimal points show that productivity increases considerably at the cost of the higher thermal efficiency with the increase of both packing density of the module and the tube ratio of hot feed fibers to cold fibers, with the latter showing relatively complex effect.

Numerical Simulation of Shell-Side Flow in Hollow Fiber Modules

MEASUREMENT AND NUMERICAL SIMULATION OF FLOW FIELD IN STIRRED TANK WITH MULTIPLE IMPELLERS

Numerical study on the flow characteristics in holey optical fibers

Flow distribution in a randomly packed hollow fiber membrane module

A CIP-based Numerical Simulation of Wave Interaction with a Fluid-Filled Membrane Submerged Breakwater

Experimental And Numerical Analyses On The Poly(Lactide-Co-Glycolide) Hollow Fiber Membranes

Numerical Simulation of the Shell-Side Mass Transfer of Randomly Packed Hollow Fiber Modules with Constant Fiber Wall Concentration

Numerical Study and Scale Analysis of Inner and Outer Diameters Prediction in Fabrication of Hollow Fiber Membranes for Nerve Regeneration

Shell-side Mass Transfer Coefficient in Randomly Packed Hollow Fiber Bundles

Effect of Random Packing on Shell-Side Flow and Mass Transfer in Hollow Fiber Module Described by Normal Distribution Function

Numerical Simulations of the Shell-Side Flow Field in Modular Helical-Coiled Heat Exchangers

Influence of Random Arrangement of Hollow Fiber Membranes on Shell Side Mass Transfer Performance: A Novel Model Prediction

Three-dimensional CFD modeling for hollow fiber gas separation membrane modules based on a dual porous media model

Analysis on the structure of different hollow fiber membrane contactors

Simulation of flow around two rotating cylinders in a side-by-side arrangement at long channel using LB-DF/FD method

Shell Side Mass Transfer Characteristics in a Parallel Flow Hollow Fiber Membrane Module

Application and performance of Dean vortices flow with spiral modules on membrane separation

Numerical Simulation and Optimal Design of AGMD-Based Hollow Fiber Modules for Desalination

A Numerical Scheme for Coupled CFD and CSD Simulation of 3-D Fluid-Membrane Interactions

CFD simulations of different spacer geometries in plate-and-frame modules

Shell side mass transfer in a transverse flow hollow fiber membrane contactor