Abstract:The conversion and selectivity of an extremely large multi-tubular fixed-bed reactor of industrial level remarkably relate to the distribution homogeneity of temperature and flow of heat transfer medium in shell side. In this work, through introducing two items of resistance source and a dispersed heat transfer source, the distribution of temperature and flow in the shell of a multi-tubular fixed-bed reactor of industrial level for butane oxidation to maleic anhydride was investigated by CFD simulation. Subsequently, effects of the window size and the location of baffles on the pressure drop of shell side and the distribution of temperature and flow were studied. It showed that the pressure drop of the shell side achieved by simulation are in good agreement with that by calculation of experimental equations, and the simulated temperature distribution of shell side is in accordance with industrial experimental data. With an increase in window area of the baffles, the pressure drop of shell side exponentially decreased, the range of large temperature difference (with a radial temperature difference greater than 2 K), and the radial temperature difference increased. With a decrease in height of the first baffle, both the range of large temperature difference and the radial temperature difference reduced, while the pressure drop of shell side did not show any consistent changes. Here the modeling strategy can be a good way to optimize the design of extremely large multi-tubular fixed-bed reactor of industrial level.

Shell side mass transfer in a transverse flow hollow fiber membrane contactor

Analysis on the structure of different hollow fiber membrane contactors

Shell Side Mass Transfer Characteristics in a Parallel Flow Hollow Fiber Membrane Module

Effect of packing density of hollow fiber contactors on shell-side mass transfer in distillation

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Calculation of shell-side mass transfer coefficient in hollow fiber dialyzer

Shell-side Mass Transfer Coefficient in Randomly Packed Hollow Fiber Bundles

Influence of Random Arrangement of Hollow Fiber Membranes on Shell Side Mass Transfer Performance: A Novel Model Prediction

Characteristics of shell-side mass transfer with hollow fibers random distribution in dialyzer

[Mass Transfer Model of Membrane Extraction for Recovery of Cadmium Ion and Zinc Ion].

Numerical Modeling and Experimental Validation of Heat Transfer and Flow Resistance on the Shell Side of a Shell-and-tube Heat Exchanger with Flower Baffles

A novel theoretical model for mass transfer of hollow fiber hemodialyzers

Enhancement of Gas-Liquid Mass Transfer in Curved Membrane Contactors with the Generation of Dean Vortices

Experimental Velocity Measurements and Effect of Flow Maldistribution on Predicted Permeator Performances

Numerical Simulation of the Shell-Side Mass Transfer of Randomly Packed Hollow Fiber Modules with Constant Fiber Wall Concentration

Mass transfer model for liquid liquid micromixing systems

Investigation on Drag Reduction Characteristics and Shell‐Side Hydrodynamics in Hollow Fiber Membrane Modules

Influence of Swelling on Flow and Mass Transfer in Hollow Fiber Membrane Extractor

An experimental and modeling investigation of the behaviors of solution in fluoropolymers hollow fiber membranes (HFMs)

Mass Transfer Modeling for Liquid Surfactant Membranes