Abstract:The gas diffusion layers (GDLs) are key components in proton exchange membrane fuel cells and understanding fluid flow through them plays a significant role in improving fuel cell performance. We used a combination of multiple-relaxation time (MRT) lattice Boltzmann method (LBM) and X-ray micro tomography imaging technology to compare results on dependence of the permeability calculation on the different system size of the computational gas diffusion layer sample. The micro-structures of the carbon paper (HP_1.76) and carbon cloth (HP_1.733) GDL were all digitizing 3D images acquired by X-ray computed micro-tomography at a resolution of 1.76 and 1.733 microns meter respectively, and the fluid flow was simulated by applying pressure gradient in both the through-plane and in-plane direction respectively. The lattice Boltzmann method for permeability calculation has already been tested in our previous work. In this work, we will focus on the permeability calculation of the realistic gas diffusion layer samples depend on the different size samples. The results show the permeability increases with fluctuations as the porosity rises. All the permeability and porosity converge to the value of large size sample that can be regarding a representative volume element. As the porosity and permeability of these Porous samples differs significantly for each other, the anisotropic permeability is nearly same for each one. We can choose part of the sample to calculate the characters if the sample is too big to calculate. We systematically study the effect of system size and periodic boundary condition and validate Darcy’s law from the linear dependence of the flux on the body force exerted.

Experimental Velocity Measurements and Effect of Flow Maldistribution on Predicted Permeator Performances

Effects of shell-side flow distribution on the separation performance of hollow fiber gas permeator

Comparing the Permeability Calculation Between Different System Size of the Computational Gas Diffusion Layer Sample in PEMFC

Analysis on the structure of different hollow fiber membrane contactors

The Effect of Fluid Dynamics Conditions and Combustion Reactions on the Performance and Heat and Mass Transfer Distribution of Dual-Phase Oxygen Transport Membranes

Effect of Pervaporation Module Structure on Separation Performance

Shell Side Mass Transfer Characteristics in a Parallel Flow Hollow Fiber Membrane Module

Flow Characteristics of Gas Permeation Through a PVF Porous Tube

Prediction The Differences Of Permeability Between Carbon Fiber Paper And Carbon Fiber Cloth In Pem Fuel Cells

Permeation of Compressed and Supercritical Fluids Through Porous Membranes

Effect of packing density of hollow fiber contactors on shell-side mass transfer in distillation

Influence of Random Arrangement of Hollow Fiber Membranes on Shell Side Mass Transfer Performance: A Novel Model Prediction

CFD modeling of flow in hollow fiber pervaporation membrane

Characterization of hollow fiber membranes in a permeator using binary gas mixtures

Effect of Random Packing on Shell-Side Flow and Mass Transfer in Hollow Fiber Module Described by Normal Distribution Function

Numerical simulation of the effect of permeability on the hydrodynamics in a parallel-plate coculture flow chamber.

Diverse Morphologies of PVDF Hollow Fiber Membranes and Their Performance Analysis As Gas/liquid Contactors

Shell side mass transfer in a transverse flow hollow fiber membrane contactor

Modeling Spiral-Wound Membrane Modules with Applications for Gas/vapor Permeation

Permeate Flux Curve Characteristics Analysis of Cross-Flow Vacuum Membrane Distillation

Investigation of Transport Property of Fibrous Media: 3D Virtual Modeling and Permeability Calculation