Abstract:<section class="article-section__content"><p>To investigate and optimize the water‐gas transport performance of microporous gas diffusion layer (GDL) flow channel, the simulation of computational fluid dynamics (CFD) is implemented with the volume of fluid method (VOF). The impact of microporous GDL flow channel with different depths, radiuses, and spacings on water transport and water removal is discussed. With the increase of microporous depth, the droplet movement velocity gradually accelerates. When the droplet returns to GDL, the peak of drag reduction rate increases first and then decreases and the peak of pressure drop tends to rise. The micropore radius has a few effects on droplet movement velocity, but it has obvious effects on the velocity field, pressure drop, and drag reduction rate. The influence of the spacing on the water droplet movement velocity and pressure drop is inconspicuous, but it has certain influence on drag reduction rate of the droplet returning to GDL and the microporous GDL velocity field. When the depth is 50 μm, radius is 50 μm, and spacing is 200 μm, the flow channel has a better drag reduction performance. The work in this paper provides a guide for the design of the microporous GDL for drag reduction and water removal.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Highlights</h3><ul class="unordered-list"><li>The impact of microporous GDL flow channel with different depths, radiuses, and spacings on water transport and water removal is discussed.</li><li>The resistance can be reduced, and water removal can be accelerated greatly in the perforated GDL.</li><li>When the micropore depth is 50 μm, radius is 50 μm, and spacing is 200 μm, the flow channel has a better drag reduction performance.</li></ul></section>

Effects of shell-side flow distribution on the separation performance of hollow fiber gas permeator

Experimental Velocity Measurements and Effect of Flow Maldistribution on Predicted Permeator Performances

Experimental Study and Numerical Simulation of the Characteristics of a Percussive Gas–solid Separator

Analysis on the structure of different hollow fiber membrane contactors

Numerical Simulation and Experimental Investigation of Flow Field in Gas-Liquid Cylindrical Separator with Baffle Configuration

Effect of packing density of hollow fiber contactors on shell-side mass transfer in distillation

Effect of Pervaporation Module Structure on Separation Performance

Effect of Random Packing on Shell-Side Flow and Mass Transfer in Hollow Fiber Module Described by Normal Distribution Function

Spatial variations of DCMD performance for desalination through countercurrent hollow fiber modules

Shell Side Mass Transfer Characteristics in a Parallel Flow Hollow Fiber Membrane Module

Effects of boundary layer mass transfer resistance on the separation performance of membrane permeators

Analysis of flow distribution in a horizontal-type molecular sieve adsorber

Effects of Cathode GDL Gradient Porosity Distribution along the Flow Channel Direction on Gas-Liquid Transport and Performance of PEMFC

Effect of Various Surface Conditions on Nanochannel Flows Past Permeable Walls

Flow Characteristics of Gas Permeation Through a PVF Porous Tube

Effect of Packing Nonuniformity at the Fiber Bundle–Case Interface on Performance of Hollow Fiber Membrane Gas Separation Modules

Performance of Gas Separator with High-Flux Polyimide Hollow Fiber Membrane

Shell side mass transfer in a transverse flow hollow fiber membrane contactor

Experimental Study on Two Different Gas-Liquid Separators Under Different Flow Patterns

Influence of perforated gas diffusion layer micropore shape parameters on water removal in a proton exchange membrane fuel cell flow channel

Engineered pinhole-stitching process of PEI-based hollow fiber membrane enables preferred performance toward light gas separation