Abstract:Improving the energy efficiency in heat exchanger networks (HENs) remains a significant industrial problem, specifically in energy-intensive operations. A particular method for such an objective is the modification of HENs at the equipment-use level, where structural changes take place and units within the network are moved, replaced and/or removed. This practice is usually known as retrofit. The objective of a retrofit is to maximize the heat recovery using the minimum modifications possible and minimum retrofit cost. Traditional retrofit techniques would normally consider one type of heat exchanger (based on the original network) with no additional design features (i.e., heat transfer enhancement technologies). The expansion of such alternatives is limited by practical use and availability of theoretical methods. In this context, the inclusion of high-performance heat exchangers such as plate heat exchangers (PHEs) has not been widely explored, even when their design and operational advantages are known. In this work, a new step-by-step automated HENs retrofit approach based on Pinch Analysis is proposed. The approach is possible to identify the best modification, its location within the network, and its cost simultaneously. Moreover, to increase energy savings, this work presents a strategy that seeks to utilize high efficiency heat exchangers such as plate heat exchangers for retrofit. A distinctive feature of this new method is the ability to handle different minimum approach temperatures, given the different types of exchangers, within the optimization of HENs. Three cases are studied using this methodology to quantify the potential benefits of including PHEs in HEN retrofits, via the analysis of the retrofit cost. Results are compared with a baseline consisting in the same network, where only Shell-and-Tube-Heat-Exchangers (STHXs) are used. In addition, the results demonstrate that this methodology is flexible enough to be applied in a wide range of retrofit problems.

Process Change Analysis of Heat Exchanger Networks with Heat Pumps

Heat Exchanger Network Design Considering The Heat Pump Performance

Graphical Analysis of the Integration of Heat Pumps in Chemical Process Systems

Improving A Process'S Efficiency by Exploiting Heat Pockets in Its Heat Exchange Network

Heat exchange network retrofit of an aromatics extraction process

Improving plant-level heat pump performance through process modifications

Process Integration and Selection of Heat Pumps in Industrial Processes

Analysis of Retrofitting the Process Controlled by Network Pinch

A Novel Step-by-Step Automated Heat Exchanger Network Retrofit Methodology Considering Different Heat Transfer Equipment

Graphical pinch analysis-based method for heat exchanger networks retrofit of a residuum hydrogenation process

Heat integration analysis for an industrial delayed coking process using pinch technology

A Target-Evaluation Method for Heat Exchanger Network Optimisation with Heat Transfer Enhancement

Progress on Heat Exchanger Network Synthesis and Optimization

Optimization and analysis for heat exchanger network of propane dehydrogenation plant by using pinch technology

Multi-objective Optimization on a Heat Exchanger Network Retrofit with a Heat Pump and Analysis of CO2 Emissions Control

A Heuristic Method to Introduce Hot Feed into Chemical Process for Energy Saving with Minor Structure Modification

A Simulation-Based Targeting Method for Heat Pump Placements in Heat Exchanger Networks

Design method of general heat exchanger networks with heat pumps based on thermal energy discretization and matching

Insightful Analysis and Targeting of the Optimal Hot Feed Toward Energy Saving

Exergoeconomic Performance Comparison, Selection and Integration of Industrial Heat Pumps for Low Grade Waste Heat Recovery

Exergy-Based Design and Analysis of Heat Exchanger Networks