Abstract:Improving the energy efficiency in heat exchanger networks (HENs) remains a significant industrial problem, specifically in energy-intensive operations. A particular method for such an objective is the modification of HENs at the equipment-use level, where structural changes take place and units within the network are moved, replaced and/or removed. This practice is usually known as retrofit. The objective of a retrofit is to maximize the heat recovery using the minimum modifications possible and minimum retrofit cost. Traditional retrofit techniques would normally consider one type of heat exchanger (based on the original network) with no additional design features (i.e., heat transfer enhancement technologies). The expansion of such alternatives is limited by practical use and availability of theoretical methods. In this context, the inclusion of high-performance heat exchangers such as plate heat exchangers (PHEs) has not been widely explored, even when their design and operational advantages are known. In this work, a new step-by-step automated HENs retrofit approach based on Pinch Analysis is proposed. The approach is possible to identify the best modification, its location within the network, and its cost simultaneously. Moreover, to increase energy savings, this work presents a strategy that seeks to utilize high efficiency heat exchangers such as plate heat exchangers for retrofit. A distinctive feature of this new method is the ability to handle different minimum approach temperatures, given the different types of exchangers, within the optimization of HENs. Three cases are studied using this methodology to quantify the potential benefits of including PHEs in HEN retrofits, via the analysis of the retrofit cost. Results are compared with a baseline consisting in the same network, where only Shell-and-Tube-Heat-Exchangers (STHXs) are used. In addition, the results demonstrate that this methodology is flexible enough to be applied in a wide range of retrofit problems.

Multi-objective Optimization on a Heat Exchanger Network Retrofit with a Heat Pump and Analysis of CO2 Emissions Control

Step-by-step retrofit of heat exchanger network with heat pump installation and multi-objective optimization strategies

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

A Systematic Strategy for Multi-Period Heat Exchanger Network Retrofit under Multiple Practical Restrictions

Multi-objective Optimization of Heat Exchanger Networks Based on Analysis of Minimum Temperature Difference and Accumulated CO2 Emissions

New Transshipment Type MINLP Model for Heat Exchanger Network Synthesis

An engineering target-oriented multi-scenario heat exchanger network retrofit methodology with consideration of exergoeconomic assessment

A Novel Step-by-Step Automated Heat Exchanger Network Retrofit Methodology Considering Different Heat Transfer Equipment

Retrofit of Heat Exchanger Networks for Multiperiod Operations by Matching Heat Transfer Areas in Reverse Order

Multi-objective Optimization of Multi-Period Interplant Heat Integration Using Steam System

Retrofit of heat exchanger networks with heat transfer enhancement based on an area ratio approach

Heat exchanger network retrofit with heat exchanger and material type selection: A review and a novel method

Multi-factor Coupling Optimization of Heat Recovery Effectiveness in a Transcritical CO2 Heat Pump

Multi-objective optimization of heat exchange network and thermodynamic cycles integrated system for cooling and power cogeneration

A new methodology for simultaneous optimization of capital and operating cost targets in heat exchanger network design

Minimizing Investment Cost for Multi-Period Heat Exchanger Network Retrofit by Matching Heat Transfer Areas with Different Strategies

Heat exchanger network retrofit by a shifted retrofit thermodynamic grid diagram-based model and a two-stage approach

Long-term investment and maintenance planning for heat exchanger network retrofit

Heat Exchanger Network Design Considering The Heat Pump Performance

Design of multi-period heat exchanger networks for overdesign control

Proactive Optimization and Control of Heat-Exchanger Super Networks