Abstract:Improving the energy efficiency in heat exchanger networks (HENs) remains a significant industrial problem, specifically in energy-intensive operations. A particular method for such an objective is the modification of HENs at the equipment-use level, where structural changes take place and units within the network are moved, replaced and/or removed. This practice is usually known as retrofit. The objective of a retrofit is to maximize the heat recovery using the minimum modifications possible and minimum retrofit cost. Traditional retrofit techniques would normally consider one type of heat exchanger (based on the original network) with no additional design features (i.e., heat transfer enhancement technologies). The expansion of such alternatives is limited by practical use and availability of theoretical methods. In this context, the inclusion of high-performance heat exchangers such as plate heat exchangers (PHEs) has not been widely explored, even when their design and operational advantages are known. In this work, a new step-by-step automated HENs retrofit approach based on Pinch Analysis is proposed. The approach is possible to identify the best modification, its location within the network, and its cost simultaneously. Moreover, to increase energy savings, this work presents a strategy that seeks to utilize high efficiency heat exchangers such as plate heat exchangers for retrofit. A distinctive feature of this new method is the ability to handle different minimum approach temperatures, given the different types of exchangers, within the optimization of HENs. Three cases are studied using this methodology to quantify the potential benefits of including PHEs in HEN retrofits, via the analysis of the retrofit cost. Results are compared with a baseline consisting in the same network, where only Shell-and-Tube-Heat-Exchangers (STHXs) are used. In addition, the results demonstrate that this methodology is flexible enough to be applied in a wide range of retrofit problems.

Exergy-Based Design and Analysis of Heat Exchanger Networks

Efficient Strategy for the Synthesis of Work and Heat Exchange Networks

Targeting and Design of Work and Heat Exchange Networks

Globally Optimal Design of Intensified Shell and Tube Heat Exchangers Using Complete Set Trimming

New Insights into T–H/H–F Diagrams for Synthesis of Heat Exchanger Networks Inside Heat Integrated Water Allocation Networks

Exergy Efficiency Design For Multi-Stream Plate-Fin Heat Exchangers Based On Entropy Generation Assessment

Thermodynamic Model Synthesis of Heat-Integrated Work Exchanger Networks

A formulated method for streams splitting in heat exchanger network design using pinch analysis

Globally optimal simultaneous heat exchanger network synthesis and basic heat exchanger design

Design method of general heat exchanger networks with heat pumps based on thermal energy discretization and matching

Optimal heat exchanger network synthesis with the detailed heat transfer equipment design

Heat Exchanger Fundamentals: Analysis and Theory of Design

A Novel Step-by-Step Automated Heat Exchanger Network Retrofit Methodology Considering Different Heat Transfer Equipment

A derivative based method for cost optimal area allocation in heat exchanger networks

Exergy and exergoenvironmental analyses for characterizing heat transfer and pressure drop of any heat exchanger

Heat exchanger network optimisation considering different shell-side flow arrangements

Thermodynamic evaluation of shell and tube heat exchanger through advanced exergy analysis

A new methodology for simultaneous optimization of capital and operating cost targets in heat exchanger network design

Optimization and utilities relocation approach for the improvement of heat exchanger network designs

Heat exchanger network design for the optimization of total annual cost of the Catalytic Reforming Unit

Graphical pinch analysis-based method for heat exchanger networks retrofit of a residuum hydrogenation process