Abstract:Improving the energy efficiency in heat exchanger networks (HENs) remains a significant industrial problem, specifically in energy-intensive operations. A particular method for such an objective is the modification of HENs at the equipment-use level, where structural changes take place and units within the network are moved, replaced and/or removed. This practice is usually known as retrofit. The objective of a retrofit is to maximize the heat recovery using the minimum modifications possible and minimum retrofit cost. Traditional retrofit techniques would normally consider one type of heat exchanger (based on the original network) with no additional design features (i.e., heat transfer enhancement technologies). The expansion of such alternatives is limited by practical use and availability of theoretical methods. In this context, the inclusion of high-performance heat exchangers such as plate heat exchangers (PHEs) has not been widely explored, even when their design and operational advantages are known. In this work, a new step-by-step automated HENs retrofit approach based on Pinch Analysis is proposed. The approach is possible to identify the best modification, its location within the network, and its cost simultaneously. Moreover, to increase energy savings, this work presents a strategy that seeks to utilize high efficiency heat exchangers such as plate heat exchangers for retrofit. A distinctive feature of this new method is the ability to handle different minimum approach temperatures, given the different types of exchangers, within the optimization of HENs. Three cases are studied using this methodology to quantify the potential benefits of including PHEs in HEN retrofits, via the analysis of the retrofit cost. Results are compared with a baseline consisting in the same network, where only Shell-and-Tube-Heat-Exchangers (STHXs) are used. In addition, the results demonstrate that this methodology is flexible enough to be applied in a wide range of retrofit problems.

Heat exchanger network optimisation considering different shell-side flow arrangements

New Transshipment Type MINLP Model for Heat Exchanger Network Synthesis

Numerical Study on Hydrodynamics, Mixing and Heat Transfer of Highly Viscous Fluid in a Novel Shell-and-tube Heat Exchanger with X-type Baffles

Globally Optimal Design of Intensified Shell and Tube Heat Exchangers Using Complete Set Trimming

Efficient Strategy for the Synthesis of Work and Heat Exchange Networks

Targeting and Design of Work and Heat Exchange Networks

Transshipment Type Model for Total Site Heat Integration Using Non-Isothermal Utility Loop

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

Optimal Process Design for Recovering Effluent Gas at Subambient Temperature

Optimal heat exchanger network synthesis with the detailed heat transfer equipment design

Heat Exchanger Network Optimization for Multiple Period Operations

Heat exchanger network area targeting considering stream allocation to shell or tubes

Thermal-economic optimization design of shell and tube heat exchanger using an improved sparrow search algorithm

Effect of Inlet Flow Maldistribution on the Passage Arrangement Design of Multi-Stream Plate-Fin Heat Exchanger

Long-term investment and maintenance planning for heat exchanger network retrofit

Optimized Design of Shell and Tube Heat Exchanger with Segmental Baffles

Heat exchanger network retrofit by a shifted retrofit thermodynamic grid diagram-based model and a two-stage approach

A new methodology for simultaneous optimization of capital and operating cost targets in heat exchanger network design

Optimization-based framework for the synthesis of heat exchanger networks incorporating controllability

A Novel Step-by-Step Automated Heat Exchanger Network Retrofit Methodology Considering Different Heat Transfer Equipment

A derivative based method for cost optimal area allocation in heat exchanger networks