Abstract:Improving the energy efficiency in heat exchanger networks (HENs) remains a significant industrial problem, specifically in energy-intensive operations. A particular method for such an objective is the modification of HENs at the equipment-use level, where structural changes take place and units within the network are moved, replaced and/or removed. This practice is usually known as retrofit. The objective of a retrofit is to maximize the heat recovery using the minimum modifications possible and minimum retrofit cost. Traditional retrofit techniques would normally consider one type of heat exchanger (based on the original network) with no additional design features (i.e., heat transfer enhancement technologies). The expansion of such alternatives is limited by practical use and availability of theoretical methods. In this context, the inclusion of high-performance heat exchangers such as plate heat exchangers (PHEs) has not been widely explored, even when their design and operational advantages are known. In this work, a new step-by-step automated HENs retrofit approach based on Pinch Analysis is proposed. The approach is possible to identify the best modification, its location within the network, and its cost simultaneously. Moreover, to increase energy savings, this work presents a strategy that seeks to utilize high efficiency heat exchangers such as plate heat exchangers for retrofit. A distinctive feature of this new method is the ability to handle different minimum approach temperatures, given the different types of exchangers, within the optimization of HENs. Three cases are studied using this methodology to quantify the potential benefits of including PHEs in HEN retrofits, via the analysis of the retrofit cost. Results are compared with a baseline consisting in the same network, where only Shell-and-Tube-Heat-Exchangers (STHXs) are used. In addition, the results demonstrate that this methodology is flexible enough to be applied in a wide range of retrofit problems.

Heat integration analysis for an industrial delayed coking process using pinch technology

Targeting and Design of Work and Heat Exchange Networks

Optimization and analysis for heat exchanger network of propane dehydrogenation plant by using pinch technology

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

Efficient Strategy for the Synthesis of Work and Heat Exchange Networks

New Transshipment Type MINLP Model for Heat Exchanger Network Synthesis

Graphical pinch analysis-based method for heat exchanger networks retrofit of a residuum hydrogenation process

Heat integration and dynamic characteristics analysis of coal pyrolysis to acetylene

A New Perspective of Thermoeconomic Analysis on a Gas-Steam Combined Cycle Power Plant

The Improved Distribution Method of Negentropy and Performance Evaluation of CCPPs Based on the Structure Theory of Thermoeconomics

Indirect Heat Integration Across Plants: Novel Representation of Intermediate Fluid Circles

New Insights into T–H/H–F Diagrams for Synthesis of Heat Exchanger Networks Inside Heat Integrated Water Allocation Networks

A Novel Step-by-Step Automated Heat Exchanger Network Retrofit Methodology Considering Different Heat Transfer Equipment

An engineering target-oriented multi-scenario heat exchanger network retrofit methodology with consideration of exergoeconomic assessment

Heat exchanger network optimisation considering different shell-side flow arrangements

Graphical Prediction of Optimum Pinch Point Value with AEA Software Simulation and Validation Applied in Closed Cycle Gas Power Plant

Method for Integrating Low-Grade Industrial Waste Heat into District Heating Network

Heat exchange network of coal to natural gas methanation process

Design method of general heat exchanger networks with heat pumps based on thermal energy discretization and matching

Heat exchanger network design for the optimization of total annual cost of the Catalytic Reforming Unit

Advancing Industrial Process Electrification and Heat Pump Integration with New Exergy Pinch Analysis Targeting Techniques