Abstract:Third-generation advanced high-strength steels possess an exceptional combination of high strength and ductility owing to their high work-hardening rate during deformation. In this study, the mechanical properties and microstructure/texture evolution of medium-Mn steel under various loading conditions (uniaxial tension, in-plane torsion, and equibiaxial tension) were investigated. Interrupted electron back-scattered diffraction and X-ray diffraction characterizations were carried out to track the microstructure and texture evolution of individual phases. Digital image correlation was employed for the in-situ measurement of formation and expansion of deformation bands, i.e., the Lüders and the Portevin-Le Châtelier (PLC) bands. The dynamic strain aging effect in terms of the formation of PLC bands and stress serrations was significantly affected by the loading conditions and stress level. Multiple types of stress serrations were observed in all tested specimens at different deformation stages. The texture evolution of the steel under various deformation modes was further tracked. Ferrite and fresh martensite exhibited the plain texture evolution like most body-centered cubic metals, whereas austenite showed a more complex texture evolution. The martensitic transformation notably decreased the RD||<001> intensity of the austenite; austenite debris was rotated with ferrite grains, while some intact austenite grains self-rotated to a stable orientation, which is unfavorable for martensitic transformation. The obvious intragranular orientation gradient observed in the austenite intact grains implies that considerable deformation occurred in the austenite. Finally, the experimental results indicate that equibiaxial tension primarily promoted the martensitic transformation, and the classical Olson–Cohen model was calibrated to capture the volume fraction evolution of austenite under various stress states.

Strain Hardening in Fe–16Mn–10Al–0.86C–5Ni High Specific Strength Steel

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Dual Nanoprecipitation and Nanoscale Chemical Heterogeneity in a Secondary Hardening Steel for Ultrahigh Strength and Large Uniform Elongation

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

In-situ investigation of strengthening and strain hardening mechanisms of Cu-added medium-Mn steels by synchrotron-based high-energy X-ray diffraction

Unveiling the relationship between dislocation structure evolution and strain hardening behavior of S32654 super-austenitic stainless steel

Investigation on strain localization and hardening of dual-phase steel by hetero-deformation induced stress

Changes in Mechanical Properties of Ultrahigh Strength Nanostructured Steel Resulting from Repeated High Strain Rate Deformation

Design of a high strength, high ductility 12 wt% Mn medium manganese steel with hierarchical deformation behaviour

Effect of Mn content and strain rate on mechanical properties of high-C high-Mn austenitic steel

Microstructure Characteristics, Mechanical Properties and Strain Hardening Behavior of B2 Intermetallic Compound-Strengthening Fe-16Mn-9Al-0.8C-3Ni Steel Fabricated by Twin-Roll Strip Casting, Cold Rolling and Annealing

Deformation mechanism and microstructure evolution of medium-Mn AHSS under various loading conditions

Subtle change in the work hardening behavior of fcc materials processed by selective laser melting

Unusual step-like stress flow behavior and mechanisms of a 1.3 GPa grade medium-Mn steel with 51.2 % ductility

Microstructural evolution and strain hardening behavior of a novel two-stage warm rolled ultra-high strength medium Mn steel with heterogeneous structures

High-Temperature Low-Cycle Fatigue Behavior of HS80H Ferritic–Martensitic Steel Under Dynamic Strain Aging

Mechanical properties and microstructure of high-strength and high-ductility steel at elevated temperature

Achieving unprecedented yield strength of 2.2 GPa with high ductility in formed parts using strain-aging

The nanoscale mechanisms of strengthening and ductility enhancement in an Al–Mg–Si–Mn alloy on processing by high-pressure torsion

Yielding Behavior and Strengthening Mechanisms of a High Strength Ultrafine‐Grained Cr–Mn–Ni–N Stainless Steel

Twinning induced strain hardening and plasticity in a γ''-precipitated medium-entropy alloy with ultrahigh yield strength