Abstract:Combined CO2 and SO2 absorption performance in a new combined capture process was evaluated in this work by experimental study using a lab-scale packed column system and a developed rate-based model in Aspen Plus. The combined absorption experiments were carried out to identify the impact of several key operating parameters, including flue gas SO2 and CO2 concentrations, CO2 and SO2 loadings, the absorption temperature, and the L/G ratio, on CO2 absorption and NH3 volatilization. Experimental results indicated that 85% CO2 absorption efficiency was achieved in 5 wt% aqueous NH3 solvent containing lean CO2 loading at 0.2 mol CO2/mol NH3 (C/N) and SO2 loading at 0.1 mol SOilmol NH3 (S/N). The rate-based model was developed using the electrolyte-NRTL method and the RateFrac module in Aspen Plus, and validated as compared to the present experimental results. The modeling results showed that the SO2 loading provided the similar effect on the CO2 mass transfer, the absorption efficiency and the heat of CO2 absorption as compared to the CO2 loading, however, the SO2 loading resulted in lower NH3 volatilization compared to CO2 loading. The lean CO2 loading and the solvent flow rate dynamic adjustment approaches in association with the lean NH3 solvent splitting process were studied to analyze the potential coordination of the combined absorption process and the sulfite treatment system. Maintaining 85% CO2 capture efficiency was possible when SO2 loading was increased from 0.1 to 0.2 S/N by reducing the lean CO2 loading from 0.2 to 0.088 C/N or increasing the solvent flow rate from 8 to 14.1 L/h. The time window for the SO2 treatment by the precipitation process was increased with the increasing split ratio of the lean NH3 solvent splitting process that was associated with the dynamic adjustment approaches. In the present study, the discussion of the combined absorption experiments using the CO2 and SO2 loaded NH3 solvent, the developed rate-based model, and the operation strategies provided valuable contributions to the advancement of the combined CO2 and SO2 capture process.

Experimental study of a hybrid solvent MEA-Methanol for post-combustion CO2 absorption in an absorber packed with three different packing: Sulzer BX500, Mellapale Y500, Pall rings 16 × 16

Orthogonal Test Design to Optimize the Operating Parameters of a Hybrid Solvent MEA–Methanol in an Absorber Column Packed with Three Different Packing: Sulzer BX500, Mellapale Y500 and Pall Rings 16 × 16 for Post-Combustion CO2 Capture

Integration Study of a Hybrid Solvent MEA-Methanol for Post Combustion Carbon Dioxide Capture in Packed Bed Absorption and Regeneration Columns

Experimental Study of Regeneration Performance for CO2 Desorption from a Hybrid Solvent MEA‐methanol in a Stripper Column Packed with Three Different Packing: Sulzer BX500, Mellapale Y500 and Pall Rings 16 × 16

Experimental Study on Hybrid MS‐CA System for Post‐combustion CO2 Capture

Comparison of several packings for CO2 chemical absorption in a packed column

Multi-field synergy study of CO2 capture process by chemical absorption

Experimental Study of the Absorption and Regeneration Performance of Several Candidate Solvents for Post-Combustion CO2 Capture

Study on Co2 Absorption by Aqueous Benzylamine and Its Formulations with Monoethanolamine As A Component for Post-Combustion Capture Process

Comparison of Absorption and Regeneration Performance for Post-Combustion Co2 Capture by Mixed Mea Solvents

Optimization of solvent properties for post-combustion CO2 capture using process simulation

Experimental Study on Postcombustion Systems Including a Hollow Fiber Membrane and a Packed Column

Performance study on mixed solvent for post‐combustion carbon capture using rotating packed bed technology

Selection of Blended Solvents for CO2 Absorption from Coal-Fired Flue Gas. Part 1: Monoethanolamine (Mea)-Based Solvents

Comparative Analysis of CO2 Separation from Flue Gas by Membrane Gas Absorption Technology and Chemical Absorption Technology in China

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

Study On Co2 Absorption Enhancement By Adding Active Carbon Particles Into Mea Solution

A multiobjective experimental based optimization to the CO2 capture process using hybrid solvents of MEA-MeOH and MEA-water

Performance of a Hybrid Solvent of Amino Acid and Ionic Liquid for CO 2 Capture

Experimental Study and Rate-Based Modeling on Combined CO2 and SO2 Absorption Using Aqueous NH3 in Packed Column

Exploiting an Alternative Co2 Absorption Process by Efficient Solvent Mixture