Abstract:Co‐current flow is chosen to represent the collective performance of all flow patterns; A trade‐off between the purity of CO2 and the recovery factor is observed; Despite the reduction of purity, a higher amount of CO2 can be recovered with a larger membrane area; A sharp decline in power requirement is observed with increasing selectivity from 2 to 20. Direct air capture (DAC) of CO2 is becoming increasingly important for reducing greenhouse gas concentrations in the atmosphere. However, the cost and energy requirements associated with DAC make it less economically feasible than carbon capture from flue gases. While various methods like solid sorbents and gas–liquid absorption have been explored for DAC, membrane processes have only recently been investigated. The objective of this study is to examine the separation performance of a membrane unit for capturing CO2 from ambient air. The performance of a membrane depends on several factors, including the composition of the feed gas, pressure ratio, material selectivity, and membrane area. The single‐stage separation process with the co‐current flow and constant permeability flux model is evaluated using a commercial module integrated with a process simulator to separate a binary mixture of carbon dioxide and nitrogen to assess the sensitivity of selectivity on purity and recovery of CO2 in permeate, and power requirement. Additionally, three levels of CO2 reduction from the feed stream to the retentate stream (25%, 50%, and 75%) are studied. A trade‐off between purity and recovery factor is observed, and achieving high purity in permeate requires high concentration in the retentate.

Experimental Study on Hybrid MS‐CA System for Post‐combustion CO2 Capture

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Experimental Study on Postcombustion Systems Including a Hollow Fiber Membrane and a Packed Column

Process optimization of CO2membrane and cryogenic hybrid separation

Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

CO2 Capture by Using a Membrane-absorption Hybrid Process in the Nature Gas Combined Cycle Power Plants

Capture by Using a Membrane-Absorption Hybrid Process in 1 the Nature Gas Combined Cycle Power Plants

Assessment of Hybrid Solvent—Membrane Configurations for Post-Combustion CO2 Capture for Super-Critical Power Plants

Modeling of CO2 Mass Transport Across a Hollow Fiber Membrane Reactor Filled with Immobilized Enzyme

Ammonia-based post-combustion CO2 and SO2 integrating capture using multi-stage solvent circulation process

Experimental Study on Carbon Capture Performance of Polyimide Hollow Fiber Membrane in Post-combustion Process

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

Understanding the performance of membrane for direct air capture of CO2

Comparative Analysis of CO2 Separation from Flue Gas by Membrane Gas Absorption Technology and Chemical Absorption Technology in China

Co2 Capture by Membrane Absorption Coupling Process: Experiments and Coupling Process Evaluation

Multi-stage Solvent Circulation Absorption Enhancement: System Optimization for Energy-Saving CO2 Capture

Modeling of hollow fiber facilitated transport membrane modules for post combustion carbon capture process: Evaluation of non-ideal effect and module characteristic

System And Processes Of Pre-Combustion Carbon Dioxide Capture And Separation

Study on process intensification of pre combustion CO capture

Field-Scale Testing of a High-Efficiency Membrane Reactor (MR)—Adsorptive Reactor (AR) Process for H2 Generation and Pre-Combustion CO2 Capture