Abstract:Co‐current flow is chosen to represent the collective performance of all flow patterns; A trade‐off between the purity of CO2 and the recovery factor is observed; Despite the reduction of purity, a higher amount of CO2 can be recovered with a larger membrane area; A sharp decline in power requirement is observed with increasing selectivity from 2 to 20. Direct air capture (DAC) of CO2 is becoming increasingly important for reducing greenhouse gas concentrations in the atmosphere. However, the cost and energy requirements associated with DAC make it less economically feasible than carbon capture from flue gases. While various methods like solid sorbents and gas–liquid absorption have been explored for DAC, membrane processes have only recently been investigated. The objective of this study is to examine the separation performance of a membrane unit for capturing CO2 from ambient air. The performance of a membrane depends on several factors, including the composition of the feed gas, pressure ratio, material selectivity, and membrane area. The single‐stage separation process with the co‐current flow and constant permeability flux model is evaluated using a commercial module integrated with a process simulator to separate a binary mixture of carbon dioxide and nitrogen to assess the sensitivity of selectivity on purity and recovery of CO2 in permeate, and power requirement. Additionally, three levels of CO2 reduction from the feed stream to the retentate stream (25%, 50%, and 75%) are studied. A trade‐off between purity and recovery factor is observed, and achieving high purity in permeate requires high concentration in the retentate.

Capture by Using a Membrane-Absorption Hybrid Process in 1 the Nature Gas Combined Cycle Power Plants

CO2 Capture by Using a Membrane-absorption Hybrid Process in the Nature Gas Combined Cycle Power Plants

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Process optimization of CO2membrane and cryogenic hybrid separation

Optimal Design of a Subambient Membrane Separation System with Work and Heat Integration for CO2 Capture

Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption

Understanding the performance of membrane for direct air capture of CO2

Experimental Study on Hybrid MS‐CA System for Post‐combustion CO2 Capture

Co2 Capture by Membrane Absorption Coupling Process: Experiments and Coupling Process Evaluation

Membrane CO2 Separation System Improvement for Coal-Fired Power Plant Integration

Multiobjective optimization of membrane in hybrid cryogenic CO2 separation process for coal-fired power plants

Optimization of Post Combustion CO2 Capture from a Combined-Cycle Gas Turbine Power Plant via Taguchi Design of Experiment

Energy-efficient Process Intensification for Post-Combustion CO2 Capture: A Modeling Approach

Membrane Cascade Type of «Continuous Membrane Column» for Power Plant Post-Combustion Carbon Dioxide Capture Part 1: Simulation of the Binary Gas Mixture Separation

An Energy–Economic–Environment Tri-Objective Evaluation Method for Gas Membrane Separation Processes of H2/CO2

Assessment of Hybrid Solvent—Membrane Configurations for Post-Combustion CO2 Capture for Super-Critical Power Plants

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

A Hybrid Method Combining Membrane Separation and Chemical Absorption for Flexible CH 4 Refinement and CO 2 Separation in Natural Gas

Simulation of the Membrane Process of CO2 Capture from Flue Gas via Commercial Membranes While Accounting for the Presence of Water Vapor

Experimental Study on Postcombustion Systems Including a Hollow Fiber Membrane and a Packed Column

Flexible Carbon Capture Using MOF Fixed Bed Adsorbers at an NGCC Plant