Abstract:In this work, the capture of carbon dioxide using a dense hollow fiber membrane was studied experimentally and theoretically. The factors affecting the flux and recovery of carbon dioxide were studied using a lab-scale system. Experiments were conducted using a mixture of methane and carbon dioxide to simulate natural gas. The effect of changing the CO2 concentration from 2 to 10 mol%, the feed pressure from 2.5 to 7.5 bar, and the feed temperature from 20 to 40 °C, was investigated. Depending on the solution diffusion mechanism, coupled with the Dual sorption model, a comprehensive model was implemented to predict the CO2 flux through the membrane, based on resistance in the series model. Subsequently, a 2D axisymmetric model of a multilayer HFM was proposed to simulate the axial and radial diffusion of carbon dioxide in a membrane. In the three domains of fiber, the CFD technique was used to solve the equations for the transfer of momentum and mass transfer by using the COMSOL 5.6. Modeling results were validated with 27 experiments, and there was a good agreement between the simulation results and the experimental data. The experimental results show the effect of operational factors, such as the fact that temperature was directly on both gas diffusivity and mass transfer coefficient. Meanwhile, the effect of pressure was exactly the opposite, and the concentration of CO2 had almost no effect on both the diffusivity and the mass transfer coefficient. In addition, the CO2 recovery changed from 9% at a pressure equal to 2.5 bar, temperature equal to 20 °C, and a concentration of CO2 equal to 2 mol%, to 30.3% at a pressure equal to 7.5 bar, temperature equal to 30 °C, and concentration of CO2 equal 10 mol%; these conditions are the optimal operating point. The results also manifested that the operational factors that directly affect the flux are pressure and CO2 concentration, while there was no clear effect of temperature. This modeling offers valuable data about the feasibility studies and economic evaluation of a gas separation unit operation as a helpful unit in the industry.

Multiobjective optimization of membrane in hybrid cryogenic CO2 separation process for coal-fired power plants

Process optimization of CO2membrane and cryogenic hybrid separation

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Optimal Design of Hybrid Cryogenic Flash and Membrane System

Optimal Design of a Subambient Membrane Separation System with Work and Heat Integration for CO2 Capture

Understanding the performance of membrane for direct air capture of CO2

CO2 Capture by Using a Membrane-absorption Hybrid Process in the Nature Gas Combined Cycle Power Plants

Capture by Using a Membrane-Absorption Hybrid Process in 1 the Nature Gas Combined Cycle Power Plants

Membrane CO2 Separation System Improvement for Coal-Fired Power Plant Integration

An Energy–Economic–Environment Tri-Objective Evaluation Method for Gas Membrane Separation Processes of H2/CO2

Tool for optimization of energy consumption of membrane-based carbon capture

Assessment of Hybrid Solvent—Membrane Configurations for Post-Combustion CO2 Capture for Super-Critical Power Plants

Unlocking advanced CO2 separation via a scalable and nitrogen-rich MOF-cross-linked polydimethylsiloxane hollow fiber hybrid membrane

Intensification of CO2 Separation Performance Via Cryogenic and Membrane Hybrid Process — Comparison of Polyimide and Polysulfone Hollow Fiber Membrane

New hybrid membrane vacuum swing adsorption process for CO2 removal from N2/CO2 mixture: modeling and optimization by genetic algorithm

Experimental Study on Hybrid MS‐CA System for Post‐combustion CO2 Capture

Simulation of the Membrane Process of CO2 Capture from Flue Gas via Commercial Membranes While Accounting for the Presence of Water Vapor

Comprehensive 3E Analysis and Multi-Objective Optimization of a Novel Process for CO2 Capture and Separation Process from Syngas

Modeling and Optimal Operating Conditions of Hollow Fiber Membrane for CO2/CH4 Separation

Optimization of Post Combustion CO2 Capture from a Combined-Cycle Gas Turbine Power Plant via Taguchi Design of Experiment

Techno-Economic Optimization of Multistage Membrane Processes with Innovative Hollow Fiber Modules for the Production of High-Purity CO2 and CH4 from Different Sources