Abstract:In this study, organic structure-directing agents (OSDA) of TPA + are used as templating agents to synthesize zeolites with different topologies, and are also served as protectants for alkali treatment to inhibit the severe silicon extraction from zeolite skeleton. The TPA + cations could be bound to the negatively charged Al sites in the framework, so we prepared a series of Cu-based ZSM-5 catalysts with meso-/microporous composite structure by using TPA + cation as a protectant for alkali treatment and evaluated the pore structures by using the hierarchy factor (HF). The results show the microporous-/mesoporous hierarchical structure of the alkali-etched catalyst with the maximal HF (0.115) effectively improved the low-temperature activity on selective catalytic reduction (SCR) of NO by ammonia, achieving complete NO x to N 2 conversion at 225-400 oC. It was shown that the TPA + cation played an important role on protecting the crystallinity, long-range order, and pore connectivity of zeolites, and substantially widened the mesopore volume with the loss of a small portion of micropores. In addition, the alkali treatment strategy involving protectant was systematically studied, including the corresponding effect on the pore structure, redox ability, acidity, and copper ion dispersion. The N 2 adsorption-desorption experiments revealed that the maximization of the HF can be obtained by adjusting the ratio of protectant to etchant (TPA + /OH - ). Among them, the Cu/ZSM-5 catalyst associated with the ratio of TPA + /OH - =0.4 and the best activity has a maximum surface area of 515 m 2 /g, which enhances the mesopore volume (0.325 cm 3 /g) by approximately three times simultaneously with only a 16.9% loss of the micropore volume (0.154 cm 3 /g). The hierarchically porous zeolites not only enhance the diffusion of mobile hydrated copper ions and ammonia-solvated copper complexes, but also facilitate the dispersion of copper ions. This work provides a feasible strategy to rapidly enhance the low-temperature de NO x efficiency on the zeolite catalysts.

Rational Design of a Novel Catalyst Cu‐SAPO‐42 for NH 3 ‐SCR Reaction

Cu-SAPO-17: A novel catalyst for selective catalytic reduction of NO

A reconstruction strategy for the synthesis of Cu-SAPO-34 with excellent NH3-SCR catalytic performance and hydrothermal stability

Controlled synthesis of Cu-based SAPO-18/34 intergrowth zeolites for selective catalytic reduction of NOx by ammonia

Selective Catalytic Reduction of NOx with Ammonia over Copper Ion Exchanged SAPO‐47 Zeolites in a Wide Temperature Range

Designing a Bifunctional Pt/Cu-SSZ-13 Catalyst for Ammonia-Selective Catalytic Oxidation with Superior Selectivity

Insight into solid-state ion-exchanged Cu-based zeolite (SSZ-13, SAPO-18, and SAPO-34) catalysts for the NH3-SCR reaction: The promoting role of NH4-form zeolite substrates

Formation of Highly Active Superoxide Sites on CuO Nanoclusters Encapsulated in SAPO-34 for Catalytic Selective Ammonia Oxidation

A controllable zeolite framework stability of Cu/SAPO-34 via adjusting the copper coordination environment for NH 3 -SCR under hydrothermal condition

Rational design on hierarchically porous Cu/ZSM-5 zeolite for promoting low-temperature NH 3 -SCR performance based on protectively alkali-etching strategy

Copper-exchanged SUZ-4 zeolite catalysts for selective catalytic reduction of NOx

The effect of Si environments on NH3 selective catalytic reduction performance and moisture stability of Cu-SAPO-34 catalysts

Location and Nature of Cu Species in Cu/SAPO-34 for Selective Catalytic Reduction of NO with NH3

Optimizing the Crystallinity and Acidity of H-SAPO-34 by Fluoride for Synthesizing Cu/SAPO-34 NH3-SCR Catalyst

One-pot hydrothermal synthesis of dual metal incorporated CuCe-SAPO-34 zeolite for enhancing ammonia selective catalytic reduction

Optimization of Hybrid Crystal with SAPO-5/34 on Hydrothermal Stability for deNOx Reaction by NH3

Recent Nh3-Scr Mechanism Research over Cu/Sapo-34 Catalyst

Understanding Catalytic Reactions over Zeolites: A Density Functional Theory Study of Selective Catalytic Reduction of Nox by Nh3 over Cu-Sapo-34

New Insight into Cu/SAPO-34 Preparation Procedure: Impact of NH4-SAPO-34 on the Structure and Cu Distribution in Cu-SAPO-34 NH3-SCR Catalysts

Low-temperature NH3 abatement via selective oxidation over a supported copper catalyst with high Cu+ abundance

Cu-SAPO-56, a potential catalyst for the selective catalytic reduction of NOx by NH3