Abstract:A series of Cu/SAPO-34 catalysts of identical chemical compositions but different crystallite sizes (1-13 mu m) was prepared by "one-pot" method. The fresh and low-temperature hydrothermally treated (LHT) catalysts were characterized by a comprehensive set of techniques, including XRF, SEM, EDS, XRD, NMR, BET, XPS, pyridine-FTIR, NH3 and diethylamine TPD, EPR as well as H-2-TPR. The reaction rates for NH3-SCR were measured under differential conditions and correlated with their physical and chemical properties. All fresh catalysts, regardless of crystallite size, showed the same bulk properties, such as chemical composition, crystallinity, acidity and copper species. After a hydrothermal treatment (96 h at 70 degrees C with 80% humidity), loss of micropore surface area, micro volume, relative crystallinities, acidity and isolated Cu2+ species was observed on all catalysts, and the extent of decrease was proportional to the average crystallite size. NH3-SCR reaction rate suffered a similar decrease with increasing crystallite size. Surface analyses by SEM-ESD, XPS and diethylamine-TPD showed an obvious surface enrichment of Si (and Bronsted acidity) on all fresh catalysts, and the degree of enrichment is also proportional to crystallite size. This surface enrichment of Si-O-Al linkages is thought to be the root cause for the structural vulnerability found on larger crystallite catalysts under LHT conditions. This understanding is entirely consistent with the observation found on the H/SAPO-34 reference materials of the same sizes, where the structural destruction is even more severe after the LHT. A mechanism for structural disintegration for larger Cu/SAPO-34 crystals was proposed, and the genesis of the Si gradient was discussed in the context of crystallization kinetics.

New Insight into Cu/SAPO-34 Preparation Procedure: Impact of NH4-SAPO-34 on the Structure and Cu Distribution in Cu-SAPO-34 NH3-SCR Catalysts

A reconstruction strategy for the synthesis of Cu-SAPO-34 with excellent NH3-SCR catalytic performance and hydrothermal stability

The effect of Si environments on NH3 selective catalytic reduction performance and moisture stability of Cu-SAPO-34 catalysts

Recent Nh3-Scr Mechanism Research over Cu/Sapo-34 Catalyst

Effect of Cu loading on the performance and kinetics of Cu/SAPO-34 catalysts for selective catalytic reduction with NH3

Quantitative Control and Identification of Copper Species in Cu–SAPO-34: a Combined UV–vis Spectroscopic and H 2 -TPR Analysis

A controllable zeolite framework stability of Cu/SAPO-34 via adjusting the copper coordination environment for NH 3 -SCR under hydrothermal condition

The role of Si coordination structures in the catalytic properties and durability of Cu-SAPO-34 as NH3-SCR catalyst for NOx reduction

Quantitative control and identification of copper species in Cu–SAPO-34: a combined UV–vis spectroscopic and H2-TPR analysis

Improvement of Low-Temperature Hydrothermal Stability of Cu/Sapo-34 Catalysts by Cu2+ Species

The enhanced catalytic activity of Cu/SAPO-34 by ion exchange method for selective catalytic reduction of nitric oxide

Pr-functionalized Cu/SAPO-34 with Superior Hydrothermal Stability for NH3-SCR: the Copper Species and Framework Stabilization Effect

Location and Nature of Cu Species in Cu/SAPO-34 for Selective Catalytic Reduction of NO with NH3

Unravelling the Phosphorus-Induced Effect on NH3-SCR Catalytic Performance, Hydrothermal Stability and SO2 Resistance of Cu/SAPO-34

The Role of Pore Diffusion in Determining Nh3 Scr Active Sites over Cu/Sapo-34 Catalysts

Migration, Reactivity, and Sulfur Tolerance of Copper Species in SAPO-34 Zeolite Toward NOx Reduction with Ammonia

The Migration of Cu Species over Cu–SAPO-34 and Its Effect on NH3 Oxidation at High Temperature

Cu/SAPO-34 prepared by a facile ball milling method for enhanced catalytic performance in the selective catalytic reduction of NO x with NH 3 .

The Effect of Sulfate Species on the Activity of NH3-SCR over Cu/SAPO-34

Optimizing the Crystallinity and Acidity of H-SAPO-34 by Fluoride for Synthesizing Cu/SAPO-34 NH3-SCR Catalyst

The Influence of Crystallite Size on the Structural Stability of Cu/SAPO-34 Catalysts