Abstract:Cu/SAPO-34 is a promising NH3-SCR catalyst and its precise preparations involving ammonia exchange, copper loading and copper distribution are still the challenges in exchange procedure of SAPO-34 support. In the present work, a new series of x-NH4-SAPO samples prepared by controlling NH3 adsorption temperature (x standed for NH3 adsorption temperature) were used to examine their impacts on the following Cu exchange compared with NH4-SAPO-34 by traditional liquid exchange. The TPD and DRIFTS experiments revealed that the NH4+ amounts on x-NH4-SAPO samples increased with the NH3 adsorption temperature decreasing. And 200-NH4-SAPO prepared by gas NH3 adsorption (GA) under 200 degrees C contained the similar NH4+ loading with L-NH4-SAPO prepared by the liquid ion exchange (LIE) method, but they presented different coordinations between NH4+ species and Si (OH) Al. After copper exchange, the H-2-TPR and EPR results unveiled monodentate NH4+ on Si-(OH) Al structure would facilitate isolated Cu2+ generation in Cu/SAPO-34, while the polydentate NH4+ would promote CuO formation via liquid Cu ion exchange. Therefore, it was found that the isolated Cu2+ content in 200-Cu-SAPO was lower than L-Cu-SAPO even under the same copper exchange condition for different NH4+ coordinations. In addition, the ex -situ IR and NMR results demonstrated that the Si O Al bonds without NH4+ protections unveiled bond breakage during the liquid Cu exchange. Finally, our study proposed NH4+ exchange mechanism on Bronsted acid sites in NH4-SAPO-34 and indicated their influences on the copper distribution and the support integrity for x-Cu-SAPO catalysts. (C) 2017 Elsevier B.V. All rights reserved.

A reconstruction strategy for the synthesis of Cu-SAPO-34 with excellent NH3-SCR catalytic performance and hydrothermal stability

New Insight into Cu/SAPO-34 Preparation Procedure: Impact of NH4-SAPO-34 on the Structure and Cu Distribution in Cu-SAPO-34 NH3-SCR Catalysts

Rational Design of a Novel Catalyst Cu‐SAPO‐42 for NH 3 ‐SCR Reaction

Optimizing the Crystallinity and Acidity of H-SAPO-34 by Fluoride for Synthesizing Cu/SAPO-34 NH3-SCR Catalyst

The role of Si coordination structures in the catalytic properties and durability of Cu-SAPO-34 as NH3-SCR catalyst for NOx reduction

The effect of Si environments on NH3 selective catalytic reduction performance and moisture stability of Cu-SAPO-34 catalysts

Cu-SAPO-17: A novel catalyst for selective catalytic reduction of NO

One-pot hydrothermal synthesis of dual metal incorporated CuCe-SAPO-34 zeolite for enhancing ammonia selective catalytic reduction

Controlled synthesis of Cu-based SAPO-18/34 intergrowth zeolites for selective catalytic reduction of NOx by ammonia

A controllable zeolite framework stability of Cu/SAPO-34 via adjusting the copper coordination environment for NH 3 -SCR under hydrothermal condition

Fabrication of Cu-CHA composites with enhanced NH3-SCR catalytic performances and hydrothermal stabilities

Optimization of Hybrid Crystal with SAPO-5/34 on Hydrothermal Stability for deNOx Reaction by NH3

Insight into solid-state ion-exchanged Cu-based zeolite (SSZ-13, SAPO-18, and SAPO-34) catalysts for the NH3-SCR reaction: The promoting role of NH4-form zeolite substrates

Effect of Cu loading on the performance and kinetics of Cu/SAPO-34 catalysts for selective catalytic reduction with NH3

Boosting the Catalytic Performance of Cu-SAPO-34 in NOx Removal Via Hydrothermal Treatment.

Location and Nature of Cu Species in Cu/SAPO-34 for Selective Catalytic Reduction of NO with NH3

Boosting the catalytic performance of Cu-SAPO-34 in NO removal via hydrothermal treatment

Pr-functionalized Cu/SAPO-34 with Superior Hydrothermal Stability for NH3-SCR: the Copper Species and Framework Stabilization Effect

Cu-SAPO-56, a potential catalyst for the selective catalytic reduction of NOx by NH3

Synergic regulation of crystalline phase, composition and morphology of SAPO-34 via metal assistance and in situ etching strategy

Selective Catalytic Reduction of NOx with Ammonia over Copper Ion Exchanged SAPO‐47 Zeolites in a Wide Temperature Range