Abstract:To ensure worker and environmental safety in daily work, it is an urgent need in industrial safety field to construct wearable sensing devices for volatile organic compounds (VOCs) leakage detection in chemical pro-duction. In this work, methanol gas was selected as the research object, and the wearable gas sensor has been constructed on a flexible substrate for systematically investigating the sensing process and performance, as well as practicality of leak detection. Electrochemical measurements demonstrated the constructed sensor possessed obvious electrocatalytic capability at 0.6 V, good linearity in the detection range of 20-100 ppm, 200-3000 ppm and 4000-30,000 ppm, and low limit of detection (3.3 ppm). This methanol gas sensor also exhibited high reproducibility, lifetime, and stable sensitivity according to the continuous repeated and long-time stability measurement results. High gas-sensitive selectivity to methanol under multiple interference gases, such as acetone, toluene, xylene, methylene chloride, acetonitrile had been demonstrated, and the response change under selectivity test was less than 16%. Significantly, it also displayed detectability in actual methanol gasoline sample, and the response time was less than 16 s. Moreover, experimental results also have proved higher content of platinum (20%) with better theoretical CO-tolerance capacity and sensing sensitivity. When main-taining a platinum content of 20%, the introduction of support materials with high specific surface area and conductivity in place of activated carbon will ensure that all sites are catalytically active, further improve the sensing sensitivity and be extended to the design of other VOCs sensors.

A Flexible and Adaptable Ethanol Vapor Sensor Derived from an Adhesive Tape

Room-Temperature Ethanol Sensors Based on Amorphous Ta2O5/Pd Hybrid Microspheres

Multi-functional Flexible Sensor Based on Composite of Polyimide Aerogel and TiO2 Nanoparticles with Applications in Humidity Sensing, Water Sensing in Liquid and Photocatalysis

Sensors for Organic Vapor Detection Based on Composites of Carbon Nonotubes Functionalized with Polymers

Room Temperature VOCs Sensing with Termination‐Modified Ti3C2Tx MXene for Wearable Exhaled Breath Monitoring

A Solid Polyelectrolyte to Detect Ethanol in Hydrocarbons

Highly selective ethanol vapour sensing materials for a new generation of gas sensors based on molecularly imprinted polymers

Ethanol Gas Sensor Based on a Hybrid Polymethyl Methacrylate–Silica Microfiber Coupler

A Novel Flexible Room Temperature Ethanol Gas Sensor Based on SnO2 Doped Poly-Diallyldimethylammonium Chloride

A reusable optical fiber sensor for ethanol gas detection with a large concentration range

High sensitivity ethanol vapor sensor based on a nematic liquid crystal film embedded optical fiber Sagnac interferometer

Facile Fabrication of Poly (diallyldimethyl Ammonium Chloride)/ti3c2tx/poly (vinylidene Fluoride) 3D Hollow Fiber Membrane Flexible Humidity Sensor and Its Application in the Monitoring of Health-Related Physiological Activity

An Ethanol Vapor Sensor Based on a Microfiber with a Quantum-Dot Gel Coating.

Development of a Sensitive Gas Sensor by Trapping the Analytes on Nanomaterials and in Situ Cataluminescence Detection

Flexible Gas Sensor Printed on a Polymer Substrate for Sub-ppm Acetone Detection

Flexible Humidity Sensor Based on Electrochemically Polymerized Polypyrrole

A Microfabricated Transparent Capacitor for Sensing Ethanol

Highly sensitive determination of paracetamol, uric acid, dopamine, and catechol based on flexible plastic electrochemical sensors

Exclusive and ultrasensitive detection of formaldehyde at room temperature using a flexible and monolithic chemiresistive sensor

Wearable Electrochemical Gas Sensor for Methanol Leakage Detection

A Room Temperature VOCs Gas Sensor Based on a Layer by Layer Multi-Walled Carbon Nanotubes/Poly-ethylene Glycol Composite