Abstract:An electrochemical gas sensor has been fabricated using molecularly imprinted polymer nanoparticles (nanoMIPs) and multiwalled carbon nanotubes on screen-printed electrodes. Methanol vapour was chosen as the target due to its toxicity as its suitability as a model for more harmful pollutant gases. The sensor functions under ambient conditions and in the required concentration range, in contrast to all previous MIP-based gas sensors for methanol. The sensitivity of the sensor was greatly improved by the addition of multiwall carbon nanotubes, resulting in a limit of detection of approximately 10 ppm. The nanoMIPs provide an inherent selectivity for the target inherent in its design. Selectivity studies were performed with structurally analogous alcohols at various concentrations, demonstrating selectivity for methanol 12.1 times that for ethanol at 2 mmol dm -3 and 4.2 times that for ethanol at 1 mmol dm -3 . Interactions with isopropanol and n-propanol were found to be non-specific, and the response to water was negligible. This demonstrates an improvement over previous methanol gas sensors based on molecularly imprinted polymers. No response was observed with carbon nanotubes alone, and no selectivity was observed with non-imprinted equivalents of the nanoMIP sensor. The resulting device is by far the most practical MIP-based instrument for methanol gas sensing thus far described in the literature, being the only example capable of functioning at the necessary methanol vapour concentrations and at the required temperature and humidity. With the selectivity and sensitivity described and the simple design, the developed device provides a substantial advance in the field of molecularly imprinted gas sensors.

Highly selective ethanol vapour sensing materials for a new generation of gas sensors based on molecularly imprinted polymers

Molecularly imprinted polymer nanoparticle-carbon nanotube composite electrochemical gas sensor for highly selective and sensitive detection of methanol vapour

Design of Highly Sensitive and Selective Ethanol Sensor Based on Α-Fe2o3/nb2o5 Heterostructure.

Room-Temperature Ethanol Sensors Based on Amorphous Ta2O5/Pd Hybrid Microspheres

A Gas Sensor Based on Zif-8-Coated Coupled Resonators with Enhanced Sensitivity and Reversible Detection Ability

Ethanol Gas Sensor Based on a Hybrid Polymethyl Methacrylate–Silica Microfiber Coupler

An Ultrahigh-Sensitivity and Selective Sensing Material for Ethanol: Α-/Γ-fe2o3 Mixed-Phase Mesoporous Nanofibers

A Zeolitic Imidazolate Framework-8-Coated Coupled Resonant Gas Sensor

An Ultrasensitive Ethanol Gas Sensor Based on a Dual-Nanoparticle In2O3/SnO2 Composite

Development of a Sensitive Gas Sensor by Trapping the Analytes on Nanomaterials and in Situ Cataluminescence Detection

Design of SnO2-based highly sensitive ethanol gas sensor based on quasi molecular-cluster imprinting mechanism

Highly Selective Mixed Potential Methanol Gas Sensor Based on a Ce0.8Gd0.2O1.95 Solid Electrolyte and Au Sensing Electrode

Highly selective detection of methanol over ethanol by a handheld gas sensor

Sensitivity Enhanced, Stability Improved Ethanol Gas Sensor Based on Multi-Wall Carbon Nanotubes Functionalized with Pt-Pd Nanoparticles

Selectivity of a ZnO@ZIF-71@PDMS Nanorod Array Gas Sensor Enhanced by Coating a Polymer Selective Separation Membrane

MoS<sub>2</sub>-enhanced epoxy-based plasmonic fiber-optic sensor for selective and sensitive detection of methanol

High-Selectivity Laminated Gas Sensor Based on Characteristic Peak under Temperature Modulation.

Highly-sensitive Optical Organic Vapor Sensor Through Polymeric Swelling Induced Variation of Fluorescent Intensity.

A durable gas sensor based on AgVO3/TiO2 nanoheterostructures to ethanol gas

Wafer-Scale Synthesized MoS2/Porous Silicon Nanostructures for Efficient and Selective Ethanol Sensing at Room Temperature

Facile Wearable Vapor/Liquid Amphibious Methanol Sensor.