Abstract:Spinel ferrites have attracted great interest in the research of sensing materials due to their excellent catalytic activity and flexible and tunable physical properties. Here, we report an environmentally friendly technique using an electrospinning system, followed by a hydrothermal method, to fabricate a highly sensitive ethanol sensor based on PdO nanosphere-modified SrFe2O4 fibers for real-time monitoring. From the evaluation of SEM, TEM, XRD, XPS, and BET, it is clear that the PdO nanospheres firmly adhere to the surfaces of SrFe2O4 fibers, which are composed of smaller grains and have a large surface area with a huge amount of adsorbed oxygen species. Comparison of the sensing performance of different amounts of loaded PdO nanospheres into SrFe2O4 fibers shows that the sensor C-2 based PdO@SrFe2O4 composite shows high selectivity for ethanol over other interfering gases with a high sensitivity of 16.4 at a relatively low temperature of 150 degrees C toward 20 ppm ethanol with fast response/recovery speed (13 s/20 s) and a low detection limit (100 ppb). Through long-term studies, it was found that the sensor was stable over a period of 60 days. Consequently, the superior sensing selectivity of C-2 based PdO@SrFe2O4 composite toward ethanol gas is attributed to the loading of PdO nanospheres into SrFe2O4 fibers, which could be effective due to charge transmission, spillover influence, and Fermi energy transferals as well as a huge surface area, and heterojunction impact can stimulate faster gas transmission kinetics and generate more catalytic spots on the surface of the sensing material. This research presents a general method for monitoring volatile organic pollutants with an ultrasensitive sensor based on spinel ferrites modified by noble metal oxide.

Room-Temperature Ethanol Sensors Based on Amorphous Ta2O5/Pd Hybrid Microspheres

Design of Highly Sensitive and Selective Ethanol Sensor Based on Α-Fe2o3/nb2o5 Heterostructure.

Enhanced Ethanol-Sensing Characteristics of Au Decorated In-doped SnO2 Porous Nanotubes at Low Working Temperature

Room Temperature VOCs Sensing with Termination‐Modified Ti3C2Tx MXene for Wearable Exhaled Breath Monitoring

A Novel Flexible Room Temperature Ethanol Gas Sensor Based on SnO2 Doped Poly-Diallyldimethylammonium Chloride

Synthesis of Co3O4/Ta2O5 Heterostructure Hollow Nanospheres for Enhanced Room Temperature Ethanol Gas Sensor

Heterojunctions on Ta2O5@MWCNT for Ultrasensitive Ethanol Sensing at Room Temperature.

Branching TiO2 Nanowire Arrays for Enhanced Ethanol Sensing

CuO/TiO2/MXene-Based Sensor and SMS-TENG Array Integrated Inspection Robots for Self-Powered Ethanol Detection and Alarm at Room Temperature

Ethanol Gas Sensing with Lower Temperature and Higher Response Based on Three-Dimensional Multilevel Materials Composed of Micron Hollow Carbon Spheres@sno2 Nanoparticles

Development of a Sensitive Gas Sensor by Trapping the Analytes on Nanomaterials and in Situ Cataluminescence Detection

Double-shell ZnO hollow microspheres prepared by template-free method for ethanol detection

Development of Pd/In2O3 hybrid nanoclusters to optimize ethanol vapor sensing.

Ultrasensitive Sensors Based on PdO@SrFe 2 O 4 Nanosphere-Modified Fibers for Real-Time Monitoring of Ethanol Gas

Au Nanoparticles Decorated Mesoporous SiO2 -WO3 Hybrid Materials with Improved Pore Connectivity for Ultratrace Ethanol Detection at Low Operating Temperature.

The room temperature ethanol gas sensors based on MoS2-CuGaO2 composite prepared by hydrothermal method

MOF-derived In2O3 nanotubes/Cr2O3 nanoparticles composites for superior ethanol gas-sensing performance at room temperature

Development of Pd/In2O3 Hybrid Nanoclusters to Optimize the Ethanol Vapor Sensing

Ultrasensitive Sensors Based on PdO@SrFe2O4 Nanosphere-Modified Fibers for Real-Time Monitoring of Ethanol Gas

Ethanol Gas Sensor Based on a Hybrid Polymethyl Methacrylate–Silica Microfiber Coupler

The room temperature ethanol gas sensors based on MoS 2 -CuGaO 2 composite prepared by hydrothermal method