Abstract:The transducer elements for such sensor arrays need to be small, low-power, and compatible with conventional microprocessing technology. The transducers include chemiresistive gas sensor, FET gas sensor, capacitive gas sensor, and inductive gas sensor. Of these transducers, chemicapacitors and chemiresistors are the best suited for low-power sensor arrays. The change of electrical properties such as conductance or capacitance upon exposure to analytes can be used to detect chemical and biological agents, respectively. Chemiresistors are simply implemented in many application fields, but they have disadvantages such as instability and cross sensitivity. Whereas chemicapacitors are known to provide superior sensitivity and recovery time because capacitance can response to very thin layers of chemoselective material down to a single molecular monolayer, resulting in the elimination of the duration time for capacitance change. In this work, the room-temperature capacitive ethanol gas sensing properties of AAO (anodic aluminum oxide) were studied and the underlying mechanisms were analyzed based on its electrode configuration and detection frequency. Figure 1 shows the progress of the experimental progress according to each electrode patterns and thicknesses. The sensor sensitivity of the chemocapacitive sensor toward ethanol was affected by the humidity because it has higher dielectric constant than ethanol. Therefore, the surface treatment of AAO was carried out by silanization using APTES and HMDS. The degree of hydrophobicity of AAO surface was determined by measuring the water contact angle by the Sessile Drop method. After surface treatment was performed in each method, the sensitivity of the sensor to the wet air was also measured. Through silanization, similar sensor sensitivity to ethanol was obtained, and at the same time, sensor sensitivity to wet air was minimized as illustrated in Figure 2. In this study, the sensor characteristics were optimized by the electrode pattern and thickness, and the gas selectivity of the sensor was improved through surface treatment. Figure 1

A Microfabricated Transparent Capacitor for Sensing Ethanol

Direct Photoelectrochemical Detection of Ethanol in Complex Biological Sample

Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique.

A Low Excitation Working Frequency Capacitively Coupled Contactless Conductivity Detection (C4D) Sensor for Microfluidic Devices

Transparent Capacitive-Type Fingerprint Sensing Based on Zinc Oxide Thin-Film Transistors

Development of a Sensitive Gas Sensor by Trapping the Analytes on Nanomaterials and in Situ Cataluminescence Detection

An Ethanol Vapor Sensor Based on a Microfiber with a Quantum-Dot Gel Coating.

Thin-Film Transistor Digital Microfluidics Circuit Design with Capacitance-Based Droplet Sensing

Anodic Aluminum Oxide(AAO)-Based Chemi-Capacitive Sensor Toward Ethanol Gas

A Flexible and Adaptable Ethanol Vapor Sensor Derived from an Adhesive Tape

A Miniaturized CMOS-MEMS Amperometric Gas Sensor for Rapid Ethanol Detection

Capacitive and Non-Contact Liquid Level Detection Sensor Based on Interdigitated Electrodes with Flexible Substrate

A Cork-Based Smart Biosensing System for Ethanol

Ultra-Compact Effective Localized Surface Plasmonic Sensor for Permittivity Measurement of Aqueous Ethanol Solution With High Sensitivity

Highly Stretchable and Transparent Dielectric Gels for High Sensitivity Tactile Sensors

A Multidisciplinary Approach toward CMOS Capacitive Sensor Array for Droplet Analysis

A reusable optical fiber sensor for ethanol gas detection with a large concentration range

A Flexible Wireless Dielectric Sensor for Noninvasive Fluid Monitoring

The iontronic sensor based on biodegradable polycaprolactone for interfacial capacitive pressure sensing

A microconductometric ethanol sensor prepared through encapsulation of alcohol dehydrogenase in chitosan: application to the determination of alcoholic content in headspace above beverages

In Situ Fabricated Liquid Metal Capacitors for Plant Sensing