Abstract:Cu(In,Ga)Se<sub>2</sub> (CIGS) solar cells attract intense interest both in research and industry fields due to their high power conversion efficiencies, low costs, and high stabilities. The power conversion efficiency of a CIGS solar cell is limited by the deep level defects distributed on the surface and in the bulk of the CIGS solar cells. In this work, we elucidate that the deep level defects are significantly suppressed during the CdS buffer layer deposition process via a chemical bath deposition (CBD) method. The X-ray photoelectron spectroscopy results show the incorporation of cadmium (Cd) into CIGS during the CdS deposition process, which is the main reason for the reduced deep level nonradiative recombination defects. Raman spectroscopy and secondary ion mass spectroscopy further reveal the reduction of nonradiative recombination deep level defects due to Cd incorporation. Besides, the high-resistivity i-ZnO layer provides field-effect passivation, leading to the enhancement of the power conversion efficiency from 11.0 to 12.1%. By a combination of the incorporation of Cd, i-ZnO passivation, and optimization of the band gap of CIGS, the champion power conversion efficiency of the CIGS solar cell is as high as 15.5% without an antireflective layer and alkali metal postdeposition treatment. Our results provide insights into the effect of the CdS buffer layer, CBD method, and high-resistivity i-ZnO layer on the performance of CIGS solar cells, which is quite helpful to further improve the power conversion efficiency of CIGS solar cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01930?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01930</a>.CIGS coevaporation deposition process; CdS CBD deposition; characterizations; top-view SEM images of CdS deposited via chemical bath deposition for different times; XRD pattern of CdS fabricated via a CBD method at 80 °C for 12 min; parameters for the simulations of the performance of CIGS solar cells with different thicknesses of i-ZnO; and EQE curves of CIGS solar cell obtained at 0, 0.5, −0.5, and 1 V DC voltage bias (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01930/suppl_file/ae0c01930_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Simulation of Graded Bandgap on the Performance of Back-Wall Superstrate CIGS Solar Cells

Increasing surface band gap of Cu(In,Ga)Se2 thin films by post depositing an In-Ga-Se thin layer.

Impact of graded CIGS absorber layer on Cd-free CIGS thin-film solar cell performance: Numerical optimization

Highly efficient CIGS solar cells based on a new CIGS bandgap gradient design characterized by numerical simulation

Efficiency enhancement of ultrathin CIGS solar cells by optimal bandgap grading. Part II: finite-difference algorithm and double-layer antireflection coatings

Silver-assisted Optimization of Band Gap Gradient Structure of Cu(In,Ga)Se2 Solar Cells Via SCAPS

Performance Analysis of Ultrathin Cu(In,Ga)Se2 Solar Cells with Backwall Superstrate Configuration Using AMPS-1D

Optimizing Wide Band Gap Cu(In,Ga)Se2 Solar Cell Performance: Investigating the Impact of "Cliff" and "Spike" Heterostructures

Towards highly efficient thin-film solar cells with a graded-bandgap CZTSSe layer

High efficiency wide gap Cu(In,Ga)Se2 solar cells: Influence of buffer layer characteristics

Investigation on the Performance of CIGS/TiO2 Heterojunction Using SCAPS Software for Highly Efficient Solar Cells

Efficiency improvement of electrodeposition-processed Cu(In,Ga)Se2 solar cell with widen surface bandgap by spin-coating In2S3 thin film

Efficiency Enhancement of Ultra-thin CIGS Solar Cells Using Bandgap Grading and Embedding Au Plasmonic Nanoparticles

Efficiency Enhancement of CIGS Solar Cells via Recombination Passivation

Tailored Band Structure of Cu(In,Ga)Se2 Thin-Film Heterojunction Solar Cells: Depth Profiling of Defects and the Work Function.

Calculation of Band Alignment and Interfacial Recombination in CZTS-Based Solar Cell

Tuning the band gap of the CIGS solar buffer layer Cd1−xZnxS (x=0–1) to achieve high efficiency

20%-efficient polycrystalline Cd(Se,Te) thin-film solar cells with compositional gradient near the front junction

An Analytical Model For Quantum Efficiency And Photocurrent Density Of The Cu(In,Ga)Se-2 Solar Cell

Hybrid Density Functional Theory Study of Cu(In1−xGax)Se2 Band Structure for Solar Cell Application

Composition variations in Cu(In,Ga)(S,Se)2 solar cells: not a gradient, but an interlaced network of two phases