Abstract:<p>Mo–Cu composites exhibit excellent physical and mechanical properties, while the problems of densification and interface seriously limit their application. In this paper, the effect of element Zr on the properties of Mo–Cu composites is investigated aiming to overcome these critical issues. Various compositions of Mo–Cu–Zr ternary composites were fabricated via ball milling, cold isostatic pressing and microwave sintering. Microstructures and mechanical properties of the prepared composites were systematically characterized and analyzed. The results show that the density and mechanical properties of the composites increase with the increase of Zr content, and the 50Mo30Cu20Zr composite achieves the highest relative density of 97.6%, hardness of 314.4 HV and compressive strength of 805.9 MPa. The increase of Zr content reduces the sintering activation energy and leads to the improvement of density. Simultaneously, the element Zr can form solid solutions and in-situ synthesis intermetallic compounds with Cu matrix, which leads to solid solubility strengthening and dispersion strengthening. Moreover, the interface between Mo and Cu phase is found to have been reinforced by the in-situ intermetallic compound particles embedded in the interface. This work provides an important reference for research of densification and mechanical property of Mo–Cu composites.</p>

Sintering Behavior and Properties of Mo-Cu Composites

The sintering behavior of ultra-fine Mo-Cu composite powders and the sintering properties of the composite compacts

Sintering Behavior of Nanocrystalline Mo-Cu Composite Powders

Densification and Properties Investigation of W-Mo-Cu Composites Prepared by Large Current Electric Field Sintering with Different Technologic Parameter

Sintering Behavior of Mo/Cu Composite Powders Prepared by Electroless Copper Plating on Molybdenum Powders

Fabrication of Mo–Cu composite powders by heterogeneous precipitation and the sintering properties of the composite compacts

Enhancing the physical properties of Mo-Cu composites through plasma spheroidized spherical molybdenum powder

PREPARATION AND DENSIFICATION OF Mo-Cu ALLOY

Investigation on sintering and deformation strengthening of Mo-Cu alloy

Microscopic Formation Mechanism and Physical Properties of Mo/Cu Composites with High Densification

Sintering and Processing Nanocomposite Powder of Mo-8wt%Cu

Microwave-assisted Synthesis of Mo–Cu Nano-Powders at an Ultra-Low Temperature and Their Sintering Properties

Microstructure and mechanical properties of Mo–Cu–Zr composites fabricated via microwave sintering

Sintering Densification of Cu/Al2O3p Nano-Composite Powders by Electroless Copper Plating

Sintering characteristics of fine grained Mo-40Cu alloy

Microstructures and Properties of Cu/50 Vol.% MoS2 Composites Prepared with Cu-coated MoS2 Powders and Sintered at Different Temperatures

Preparation and Sintering Behavior of Ultra-Fine Mo-30Cu Composite Powders

Effect of Mo Nanoparticles on Microstructure and Mechanical Properties of Cu Alloys by Self-Propagating and Spark Plasma Sintering

Effects of Process Parameters on Microstructure and Properties of TiC Reinforced Cu-Matrix Composites

Microstructure and thermal and electric conductivities of high dense Mo/Cu composites

Microstructure and properties of Mo-50%Cu alloy by mechanical milling and pressure-assisted solid state sintering