Abstract:h-BN-ZrO2-SiC multiphase ceramics were prepared rapidly by spark plasma sintering (SPS) with h-BN, ZrO2 and SiC powders as raw materials and 8% (Al2O3+Y2O3) as sintering aids. The effects of nano SiC content on the densification, microstructure and mechanical properties of h-BN-ZrO2-SiC multiphase ceramics were investigated. The results show that the addition of nano SiC particles can effectively promote the sintering and increase density and mechanical properties of the sintered samples at a low sintering temperature. The flexural strength, fracture toughness and elastic modulus all increase with the content increase of nano SiC, especially, the increment of the elastic modulus is obvious. The comparison of all results shows that the sample with the SiC content of 25% has optimal mechanical properties, and the flexural strength, fracture toughness and elastic modulus are 268.4 MPa, 3.24 MPa.m(1/2) and 115 GPa, respectively. It is mainly because the nano SiC particles can better play a gap filling, dispersion strengthening and grain boundary pinning effect than ZrO2, which are beneficial to improve the bonding strength between the phases and reduce the residual stress due to thermal mismatch. As a result, more fracture energy is absorbed during the crack propagation process, and the flexural strength and fracture toughness increase.

Effect of SNNWS content on the microstructure and properties of SNNWS/Si-C-N ceramic composites via PIP

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

The Microstructure and Thermal Diffusivity of Carbon Nanostructures/Si3n4 Composites Processed Using Spark Plasma Sintering

Effect of SiCP Content on β-SiAlON/SiC Nanocomposite Ceramic

Microstructure and mechanical properties of SiC nanowires reinforced titanium matrix composites

3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties

Synthesis and properties of porous SiN/SiC nanocomposites by carbothermal reaction between SiN and carbon

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Effects of in situ formed nanostructures on the structure and properties of C/SiOC composites

Effect of Infiltration-and Pyrolyzation-Treatment on Mechanical Properties of Pressureless Sintered SiC/h-BN Ceramics

Effect of Si<sub>3</sub>N<sub>4</sub> Nanowires on the Mechanical Properties and Dielectric Constant of Porous Si<sub>3</sub>N<sub>4</sub> Ceramics

Effect of Si/C Ratio and Their Content on the Microstructure and Properties of Si–B–C–N Ceramics Prepared by Spark Plasma Sintering Techniques

Effect of SiCnws on flexural strength of SiCf/HfC-SiC composites after impact and ablation

Strengthening and Toughening Effects of MWCNTs on Si2BC3N Ceramics Sintered by SPS Technique

Densification and Mechanical Properties of Si3N4/SiC Nanocomposite Using Si-Nitrided Si3N4 Powder

Study on In-Situ Reaction Synthesis and Mechanical Properties of Si2N2O Ceramic

Effect of Nano SiC on Microstructure and Mechanical Properties of BN-ZrO2-SiC Multiphase Ceramics

Fabrication, Microstructural Evolution, and Mechanical Properties of SiC/(Hf0.25Ta0.25Zr0.25Nb0.25)C/C Nanocomposites

Mechanical and Tribological Properties of SiC-GNPs Composites Prepared by Oscillatory Pressure Sintering

Influence of α-Si3N4 coarse powder on densification, microstructure, mechanical properties, and thermal behavior of silicon nitride ceramics

MICROSTRUCTURE, MECHANICAL PROPERTIES AND FRICTION/WEAR BEHAVIOR OF HOT-PRESSED Si₃N₄/ BN CERAMIC COMPOSITES