Abstract:In the present work, a novel and facile process has been proposed to fabricate porous Si2N2O-Si3N4 multiphase ceramics with low dielectric constant (εr＜4.0). Since silica poly-hollow microspheres could serve as the source of SiO2 and the pore-forming agent, they have been introduced into Si3N4 slurry through the gelcasting technique. This process is benefited from the liquid phase sintering reaction between SiO2 and Si3N4 with the aid of sintering additives, leading to in-situ synthesis of Si2N2O phase and porous structure. The content of silica poly-hollow microspheres has great influence on the properties of the final products. It indicates that Si2N2O phase would become the major phase when the content of silica poly-hollow microspheres was above 25wt%. Furthermore, the micromorphology results reveal that the content of pores with many smaller aggregate microspheres increases as microspheres amount rises. As a result, along with the addition of silica poly-hollow microspheres, the bulk density decreases to 1.32±0.01g/cm3, and open porosity ranges from 28.4±0.4% to 52.0±0.5%. Porous Si2N2O-Si3N4 multiphase ceramics prepared with 25wt% silica poly-hollow microspheres addition possess flexural strength of 42.3±3.8MPa, low dielectric constant of 3.31 and loss tangent of 1.93×10−3. It turns out to be an effective method to fabricate porous Si2N2O-Si3N4 composites with excellent mechanical and dielectric properties, which could be applied to radome materials.

Effect of Si<sub>3</sub>N<sub>4</sub> Nanowires on the Mechanical Properties and Dielectric Constant of Porous Si<sub>3</sub>N<sub>4</sub> Ceramics

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

EFFECT OF SINTERING AID ON MECHANICAL AND DIELECTRIC PROPERTIES OF POROUS SILICON NITRIDE CERAMICS

Fabrication and Strengthening of Porous Si3N4 Ceramics by Replacement of Oxide Phase with Si3N4 at Grain Boundary Through Carbothermal Nitridation

Mechanical and Dielectric Properties of Porous Si3N4–SiC(BN) Ceramic

The Effect of Nano-Si<sub Align=right>3n<sub Align=right>4 on Properties of Silicon Nitride Ceramics

In-situ Reaction Synthesis of Porous Si2N2O-Si3N4 Multiphase Ceramics with Low Dielectric Constant Via Silica Poly-Hollow Microspheres

Electromagnetic wave-transparent porous silicon nitride ceramic prepared by gel-casting combined with in-situ nitridation reaction

Effects of pore structures on the dielectric properties of silicon nitride-based ceramics

Preparation and Properties of Porous Si<sub>3</sub>N<sub>4</sub>/SiO<sub>2</sub>/BN Composite Ceramics

Effect of Sintering Additives on Microstructure and Mechanical Properties of Porous Silicon Nitride Ceramics

Study on Microstructure and Mechanical Properties of Porous Si<sub>3</sub>N<sub>4</sub> Ceramics

Mechanical and Dielectric Properties of Porous Si3n4-Sio2 Composite Ceramics

Synthesis and Mechanical Properties of Highly Porous Ultrafine-Grain Si3N4 Ceramics Via Carbothermal Reduction-Nitridation Combined with Liquid Phase Sintering

Effects of α-Si3N4 seeds on properties of porous laminated silicon nitride ceramics

Biomimetic Synthesis of Porous Si_3N_4 Ceramics

Microstructure and properties of porous Si3N4 ceramics by gelcasting-self-propagating high-temperature synthesis (SHS)

Effect of Sintering Additive Content on Mechanical and Dielectric Properties of Porous Si3N4/BN Composite Ceramics

Study on In-Situ Reaction Synthesis and Mechanical Properties of Si2N2O Ceramic

Microstructure Control and Mechanical Properties of Porous Silicon Nitride Ceramics

Morphology Design of Porous Si2N2O Ceramics via Silica Poly-Hollow Microspheres

Effect of Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt; Nanowires on the Mechanical Properties and Dielectric Constant of Porous Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt; Ceramics