Abstract:Tandem pumping is a promising technique for gaining higher power from ytterbium-doped fiber (YDF) lasers. However, the characteristics of tandem pumped laser light, especially their variation with the lasing wavelengths, were not thoroughly investigated. We investigated the characteristics with the first 1018-nm tandem-pumped high-power tunable YDF laser. The 1018-nm tandem pumping was not applicable in tunable fiber lasers before because its much-lower absorption requires compensation of long YDFs, which enhances destructive nonlinear effects as a barrel effect for tuning wavelengths. Here, the setup used a fiber ring-cavity as seed, which was much more cost-effective than conventional setups, and only three stages of amplification, of which the last stage was unidirectional tandem-pumped. By deliberate system design, it gained over 1-kW output powers at wavelengths tuning from 1060-1090 nm with similar to 100-pm 3 dB linewidths and 79.4%similar to 85.6% slope efficiencies. Amplified spontaneous emissions (ASE) and stimulated Brillouin scattering (SBS) caused no limits for further scaling powers. Variations of spectra and beam qualities of the outputs with the tuning wavelengths were revealed in detail in the experiment. Drastically varying linewidths at similar to 1062 and similar to 1080 nm suggested complex evolution of the nonlinear effects with the pump light. This study offers not only an economic seed setup to high-power narrow-linewidth tunable fiber lasers, but detailed characteristics of laser amplified with 1018-nm pump in YDFs. The knowledge of the characteristics can usefully guide future design of high-performance tandem-pumped fiber lasers.

Side-pumping Combiner for High-Power Fiber Laser Based on Tandem Pumping

Coherent Combining of Two Pulsed Solid State Lasers

Research on Multi-Kilowatts Level Tapered Fiber Bundle N×1 Pumping Combiner for High Power Fiber Laser

Pump-Signal Combiner With Large-Core Signal Fiber Feed-Through For Fiber Lasers And Amplifiers

Design and fabrication of >20 KW 5 × 1 pump combiner with high efficiency

Pump Couplers in A Cascaded Structure

Pump Couplers in a Series Connection

End-pump silica-fluoride fiber combiner utilizing tapering and assembling technique for mid-infrared laser systems

A Side-Pump Coupler With Refractive Index Valley Configuration for Fiber Lasers and Amplifiers

Tapered Fused Fiber Bundle Coupler Capable of 1 Kw Laser Combining and 300 W Laser Splitting

High power signal combiner for fiber lasers

High power ring spot adjustable fiber combiner based on (6 + 3) × 1 structure

Experimental Research on High Power Tandem Pumped Fiber Laser with Homemade Gain Fiber

High coupling efficiency and low signal light loss (2 + 1) × 1 coupler

100 Μm Core Diameter Monolithic Fiber Side-Pumping Coupler for 10 Mj 10 Ns All-Fiber Laser

Side-polished Silica-Fluoride Multimode Fibre Pump Combiner for Mid-IR Fibre Lasers and Amplifiers

Comparison of Tandem Pumping and Direct Pumping on High-Power Linearly Polarized Fiber Laser.

Fused angle-polished multi-points side-pumping coupler for monolithic fiber lasers and amplifiers

Tandem-Pumped High-Power Narrow-Linewidth Fiber Laser Tunable from 1060–1090 Nm

Fused Side-Coupler for Double-Clad Fiber Lasers

High power mid-infrared side-pump combiner with good thermal stability based on the point-by-point fusion splicing technique